Abstract:The microstructure of a carbon fiber‐reinforced ZrC matrix composite, Cf/ZrC, manufactured by reactive melt infiltration (RMI) was characterized by optical microscopy, X‐ray diffraction, scanning electron microscopy, electron backscattering diffraction (EBSD), and transmission electron microscopy. Characterization results revealed a heterogeneous microstructure typical of composites processed by RMI. The major features that were observed include ZrC single crystals in the matrix, Zr–ZrC eutectic phase, and the fiber/matrix interface. The hardness and modulus of ZrC single crystals and the eutectic phase were determined through micro‐ and nanoindentation. EBSD studies proved that ZrC matrix grains distribute randomly. Fiber bundle areas were examined and revealed poor intrabundle infiltration. Closer inspection of the ZrC crystals revealed the presence of never‐before reported inclusions. Analysis of the inclusions revealed their phase composition and a microstructural formation mechanism outlines their development during processing. The phase composition was proved to be nanosized α‐Zr with round or needle‐like shape. There are two plausible mechanisms for the formation of the inclusion. One is the trapping mechanism that some liquid zirconium from grain boundaries of ZrC grains may become trapped inside ZrC particles during their coalescence growth. The other is precipitation mechanism that α‐Zr may precipitate inside some ZrC grains during formation of Zr–ZrC eutectic phase or ZrC grains with deficient carbon under cooling.

Influence of Reactive Melt Infiltration Parameters on Microstructure and Properties of Low Temperature Derived Cf/ZrC Composites

Dense Submicron-Sized ZrC – W Composite Produced by Reactive Melt in Fi Ltration at 1200 ° C

Influence of Zrc Content on the Elevated Temperature Tensile Properties of Zrcp/W Composites

Microstructure and Mechanical Properties of ZrC x -NbC y -Cu Composites by Reactive Infiltration at 1 300 °C

Microstructure and Mechanical Properties of Mo-ZrC-Cu Composites Synthesized by Reactive Melt Infiltration of Zr-Cu Melt into Porous Mo2C Preforms at 1300 °C

Outstanding Mechanical and Ablation Resistance of C/C–ZrC–W Composites Prepared Via Slurry Impregnation and Reactive Melt Infiltration at 1500 ℃

Effect of infiltration time on the microstructure and mechanical properties of C/C-SiC composite prepared by Si‐Zr10 alloyed melt infiltration

Microstructural development of a Cf/ZrC composite manufactured by reactive melt infiltration

Reaction mechanism and microstructure development of ZrSi2 melt-infiltrated Cf/SiC-ZrC-ZrB2 composites: The influence of preform pore structures

Processing of ZrC-W composites produced by reactive melt infiltration method

Novel low temperature derived W f /W-ZrC-Cu composites by reactive infiltration with enhanced mechanical and thermal physical properties

ZrC Modified Carbon/carbon Composites Using ZrSi2 and Zr-Cu Alloys As Reactive Infiltrating Materials: A Comparative Investigation

Effect of heat treatment on the microstructure and ablation performance of C/C–SiC composites containing ZrSi 2 –Si

Fabrication and properties of Cf/ZrC‐SiC‐based composites by an improved reactive melt infiltration

Microstructural Characterization of a Cf/ZrC Composite Manufactured by Reactive Melt Infiltration

Microstructure and Properties of ZrC–W Composite Fabricated by Reactive Infiltration of Zr2Cu into WC/W Preform

Microstructure and Mechanical Properties of Intragranular W-Cu/TiC-ZrC Composite Prepared by Reactive Melt Infiltration at 1300 °C

Influence of ZrC on the Microstructure of Its Surrounding Resin-Based Carbon at High Temperature

Microstructural Analysis Of A C-F/Zrc Composites Produced By Melt Infiltration

Microstructure and Mechanical Properties of W-ZrC Composites Synthesized by Reactive Melt Infiltration of Zr2Cu into Porous Preforms from Partially Carburized W Powders

Radio frequency‐assisted zirconium carbide matrix deposition for continuous fiber‐reinforced ultra high temperature ceramic matrix composites