Abstract:Understanding the correlation of C/C preform density and microstructure and properties of the resulting composites is of great importance for the fast and economical fabrication of ultra-high-temperature ceramic matrix composites by reactive melt infiltration. In this paper, C/C-ZrC composites were prepared by eutectic Zr-Si alloyed melt infiltration using different density C/C composite preforms, and the influence of C/C preform densities on the microstructure and mechanical properties of the composites was investigated. The results showed that the densities of the composites decreased with the increase of the C/C preform densities while the open porosities always kept at small values. The C/C-ZrC composites were generally composed of carbon, ZrC phase, and Zr2Si phase. The microstructure and phase composition of the composites were greatly influenced by C/C preform densities. Flexural strength of the composites initially increased with C/C preform densities, and then decreased reversely. The C/C-ZrC composite reached its highest flexural strength, 241 MPa, when the C/C preform density was 1.28 g/cm3. This work revealed the correlation of C/C preform density and microstructure and mechanical properties of C/C-ZrC composites, and will provide a guidance for performance optimization of reactive melt infiltrated ultra-high temperature ceramic matrix composites.Graphical abstractThe (a): densities and open porosities; (b): XRD patterns; (c): flexural strength of the C/C-ZrC composites prepared by C/C composite preforms with different densities

Microstructure and Mechanical Properties of Mo-ZrC-Cu Composites Synthesized by Reactive Melt Infiltration of Zr-Cu Melt into Porous Mo2C Preforms at 1300 °C

Microstructure and Mechanical Properties of ZrC x -NbC y -Cu Composites by Reactive Infiltration at 1 300 °C

Dense Submicron-Sized ZrC – W Composite Produced by Reactive Melt in Fi Ltration at 1200 ° C

Microstructure and Mechanical Properties of W-ZrC Composites Synthesized by Reactive Melt Infiltration of Zr2Cu into Porous Preforms from Partially Carburized W Powders

Influence of Reactive Melt Infiltration Parameters on Microstructure and Properties of Low Temperature Derived Cf/ZrC Composites

Microstructure and mechanical properties of Mo–Cu–Zr composites fabricated via microwave sintering

Microstructure and Mechanical Properties of Intragranular W-Cu/TiC-ZrC Composite Prepared by Reactive Melt Infiltration at 1300 °C

Microstructure and Mechanical Properties of ZrC-W-Cu Composites Prepared Via Gas Pressure Infiltration

Microstructure and mechanical properties of nano-carbon reinforced Mo–Cu–Zr composites

Microstructure and Mechanical Properties of ZrC-TaC Composite Fabricated by Displacive Compensation of Porosity at 1300 °C

Microstructure and Properties of ZrC–W Composite Fabricated by Reactive Infiltration of Zr2Cu into WC/W Preform

ZrC Modified Carbon/carbon Composites Using ZrSi2 and Zr-Cu Alloys As Reactive Infiltrating Materials: A Comparative Investigation

Influence of Zr addition on the microstructure, mechanical and electrical properties of Mo-Cu alloy

W-ZrC composites prepared by reactive melt infiltration of Zr2Cu alloy into partially carburized W preforms

Effect of infiltration time on the microstructure and mechanical properties of C/C-SiC composite prepared by Si‐Zr10 alloyed melt infiltration

Microstructure and flexural strength of C/HfC-ZrC-SiC composites prepared by reactive melt infiltration method

Microstructure and Mechanical Properties of High Densification Mo/Cu Composites

Microstructure and Mechanical Properties of Three Dimensional Cf/SiC-ZrC-ZrB2 Composites Prepared by Reactive Melt Infiltration Method

Microstructural Analysis Of A C-F/Zrc Composites Produced By Melt Infiltration

Correlation of C/C preform density and microstructure and mechanical properties of C/C-ZrC-based ultra-high-temperature ceramic matrix composites

Processing of ZrC-W composites produced by reactive melt infiltration method