Abstract:A hydrothermal method was employed to synthesize the precursor of nano-zirconium carbide, which was subsequently heat treated at high temperatures under vacuum to obtain finely dispersed nanometer-sized zirconium carbide powder through a carbothermic reduction reaction. Scanning Electron Microscopy (SEM) was utilized to examine the microstructure of the precursors obtained under different hydrothermal conditions and carbon contents. The effects of different heat treatment temperatures on the microstructure of the products were analyzed. Transmission Electron Microscopy (TEM) confirmed the boundary coating structure of the hydrothermal precursor and provided insights into the phase structure of the nanometer-sized zirconium carbide. The reaction mechanism and temperature involved in the carbothermic reaction process were determined through calculations. Furthermore, the energy, phase and microstructure of the reaction were investigated using Thermogravimetric Analysis (TG-DSC) and X-ray Diffraction (XRD) at different temperatures. The obtained results revealed that the zirconium carbide precursor was synthesized via the hydrothermal method exhibited a coreshell structure with a boundary coating, which not only ensured uniform contact between C and ZrO2 particles but also facilitated the formation of zirconium carbide. The results show that the most suitable process parameters are Zr/C 1: 7, 240 degrees C and 24 h. The thermodynamic calculation results show that ZrO2 combines with carbon to form CO and ZrC when the temperature reaches 1656.56 degrees C. As the temperature rises, CO reacts with ZrO2 to form ZrC and CO2. TG-DSC shows that the carbothermal reduction reaction starts at 1100 degrees C and reaches its peak at 1418 degrees C. XRD analysis confirms that when the temperature reached 1450 degrees C ZrC appeared. At 1600 degrees C, the phase transition of ZrC is basically completed. TEM images showed that the synthesized zirconium carbide particles were about 30 nm.

Influence of ZrC on the Microstructure of Its Surrounding Resin-Based Carbon at High Temperature

Influence of Zrc Content on the Elevated Temperature Tensile Properties of Zrcp/W Composites

Influence of Reactive Melt Infiltration Parameters on Microstructure and Properties of Low Temperature Derived Cf/ZrC Composites

High-temperature Diffusion Behavior of ZrC in C Matrix and Its Promotion on Graphitization

Microstructure and Mechanical Properties of ZrC Coating on Zirconium Fabricated by Interstitial Carburization

Effects of Stoichiometry and High-Temperature Annealing on Zirconium Carbide Coating Layer in TRISO Particles

Influences of Zr on Carbide and Property of Cast M951 Alloy

Effect of Heat Treatment on Microstructure and Mechanical Properties of ZrC Particles Reinforced Tungsten-Matrix Composites

Evolution of Phase, Microstructure and ZrC Lattice Parameter in Solid-solution-treated W-ZrC Composite

Ablation behavior of ZrC-SiC-ZrB2 and ZrC-SiC inhibited carbon/carbon composites components under ultrahigh temperature conditions

Microstructure Analysis of Zirconium Carbide Layer on Pyrocarbon-Coated Particles Prepared by Zirconium Chloride Vapor Method

Effect of temperature-dependent nano SiC on the ablation resistance of ZrC coating

Microstructural Characterization of a Cf/ZrC Composite Manufactured by Reactive Melt Infiltration

Effect of Carbon on Microstructure and Mechanical Properties of TiZrNb0.5V0.5 Lightweight Refractory High Entropy Alloy

High‐temperature tensile strength and fracture behavior of ZrB2‐SiC‐graphite composite

Effects of Carbon Black on Microstructure and Mechanical Properties of Hot Pressed ZrB<sub>2</sub>-SiC Ceramics

Effects of ZrC content on the microstructure and mechanical property of ZrC/ZTA composites consolidated by hot pressing

The Study of Carbothermic Reduction–sintering of ZrO2–ZrC–C Composite Microspheres Prepared by Internal Gelation

Synthesis and Characterization of ZrCx Coatings with Different Stoichiometry

Fabrication and Oxidation Behavior of a Reaction Derived Graphite–zrc Composite for Ultrahigh Temperature Applications

Preparation and Characterization of Zirconium Carbide Nano Powder by Hydrothermal and Carbothermal Reduction Methods