Abstract:To refine microstructure, adjust the ratio of gamma/alpha(2) and improve the mechanical properties, Ti46Al 2.6 C-xNb (at. %) alloys were prepared by arc melting under the action of ultrasound. The phase composition, lamellar colony size, elements distribution, the kinds and distribution of carbides and compressive properties were investigated. Results show that as the Nb content increases, the relative content of alpha(2) phase and Ti2AlC phase increases, and the relative content of gamma phase decreases. TiC phase completely reacts to form Ti2AlC phase and its shape changes from coarse long rod to short rod. The microstructure was refined with the addition of Nb under ultrasound treatment. Lamellar colony size decreases from 36.9 to 21.5 mu m, lamellar spacing decreases from 1.6 to 0.8 pm, and the length-diameter ratio of Ti2AlC decreases from 5.4 to 4.0 when the Nb content increases from 0 to 8.0 at. %. During solidification process, not only the component supercooling and heterogeneous nucleation of Nb are increased, but also the crystal grains are broken and the nucleation barrier is reduced under the action of ultrasound to promote the nucleation. The microstructure is refined and the uniformity of the element distribution is improved. Compressive results show that the strength increases from 2074.1 to 2474.2 MPa and the strain increases from 23.4% to 28.0% when the Nb content increases from 0 to 4 at. %. The refinement of lamellar colony and Ti2AlC, the ratio of gamma/alpha(2 )and solid-solution of Nb are the main reasons for improving compressive properties. (C) 2022 Elsevier B.V. All rights reserved.

Microstructure and oxidation behavior of Nb-based multi-phase alloys

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

Structural evolutions and mechanical behaviours of carbides in Nb-Ti-C alloys

High-Temperature Oxidation of NbTi-Bearing Refractory Medium- and High-Entropy Alloys

Microstructure and High Temperature Properties of Nb<sub>2</sub>O<sub>5</sub>/TiO<sub>2</sub> Coatings by Micro-arc Oxidation

Microstructure Evolution of As-Cast Nb-Ti-C Alloys

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy

Cyclic oxidation behavior of Nb/Mn/Si alloying beta-gamma TiAl alloys

Effect of Nb on the High Temperature Oxidation of Ti–(0–50 At.%)al

Understanding the Role of Carbon Atoms on Microstructure and Phase Transformation of High Nb Containing Tial Alloys

Effects of Niobium on Phase Composition and Improving Mechanical Properties in TiAl Alloy Reinforced by Ti2AlC

Effects of Niobium and Ultrasonic Action Coupling on Microstructure Evolution and Mechanical Properties of Ti46Al2.6 C Alloy

Comparative Study on the Effect of Nb/Mo Alloying on the Oxidation Behavior of Ti42Al5Mn Alloy

Effects of Nb on Microstructure and Mechanical Properties of Ti42Al2.6C Alloys

Mechanism of Interstitial Atoms on Oxidation and Fracture of Niobium-Silicon Alloys

Microstructure and Cyclic Oxidation Behavior of Silicide Coatings Prepared by Molten Salt on Nb–Based Alloys

Effect of Nb Content and Temperature on the TiN Formation During the Oxidation of Ti 3 Al

High Temperature X-Ray Diffraction Study of the Effect of Nb and Si on Oxidation Behavior of Ti3Al Alloy

Oxidation and mechanical behavior of intermetallic alloys in the TiNbAl ternary system

Oxidation behavior of Nb-16Si-20Ti-3Al containing nano-ZrC fabricated by laser melting deposition