Abstract:Abstract Liquid crystal thermography and infrared thermography techniques are typically employed to measure detailed surface temperatures, where local heat transfer coefficient (HTC) values are calculated by employing suitable conduction models. One such practice, which is very popular and easy to use, is the transient liquid crystal thermography using one-dimensional semi-infinite conduction model. In these experiments, a test surface with low thermal conductivity and low thermal diffusivity (e.g. acrylic) is used where a step-change in coolant air temperature is induced and surface temperature response is recorded. An error minimization routine is then employed to guess heat transfer coefficients of each pixel, where wall temperature evolution is known through an analytical expression. The assumption that heat flow in the solid is essentially in one-dimension, often leads to errors in HTC determination and this error depends on true HTC, wall temperature evolution and HTC gradient. A representative case of array jet impingement under maximum crossflow condition has been considered here. This heat transfer enhancement concept is widely used in gas turbine leading edge and electronics cooling. Jet impingement is a popular cooling technique which results in high convective heat rates and has steep gradients in heat transfer coefficient distribution. In this paper, we have presented a procedure for solution of three-dimensional transient conduction equation using alternating direction implicit method and an error minimization routine to find accurate heat transfer coefficients at relatively lower computational cost. The HTC results obtained using 1D semi-infinite conduction model and 3D conduction model were compared and it was found that the heat transfer coefficient obtained using the 3D model was consistently higher than the conventional 1D model by 3–16%. Significant deviations, as high as 8–20% in local heat transfer at the stagnation points of the jets were observed between h1D and h3D.

Liquid Crystal Thermography Measurement Uncertainty Analysis and Its Application to Turbulent Heat Transfer Measurements

Measurement Accuracy and Application of Liquid Crystal Thermography Technique in Turbulent Flow Heat Transfer

Uncertainties of the Transient Thermochromic Liquid Crystal Method in Gas Turbine Internal Cooling Measurements

Calibrations and the measurement uncertainty of wide-band liquid crystal thermography

Analysis of uncertainties in two-parameter transient heat transfer measurements with liquid crystal

A Liquid Crystal Thermography Calibration with True Color Image Processing

Effect of Coating Thickness on the Calibration and Measurement Uncertainty of A Wide-Band Liquid Crystal Thermography

Improved Liquid-Crystal Thermometry Excluding Human Color Sensation

Determination of Local Heat Transfer Coefficient Based on Bulk Mean Temperature Using a Transient Liquid Crystals Technique

INVESTIGATION OF A QUASI-STEADY LIQUID CRYSTAL TECHNIQUE FOR FILM COOLING HEAT TRANSFER MEASUREMENTS

Determining mainstream reference temperature using the non-dimensional temperature analysis in the transient liquid crystal technique

A Study on Thermo-Camera Using Liquid Crystal. Method of Multiple Regression Between Color and Temperature.

Research on Transient Measurement of Heat Transfer Coefficient Distribution with Liquid Crystal Technique

Study on the Measurement of Temperature Field Using Laser Holographic Interferometry

Measurements Of Surface Temperature And Heat Transfer Using A Fluorescence Imaging System Based On Thermographic Phosphors

Study on thermometry of leading edge of rotating turbine blade by thermochromic liquid crystal

UNCERTAINTY ANALYSIS FOR NUMERICAL MODELING OF SURFACE HEAT TRANSFER CHARACTERISTICS IN EXPERIMENTS—APPLICATION TO POST-CHF FLOW BOILING TESTS

Application of transient liquid crystal on internal cooling research of gas turbine airfoil

Three-Dimensional Transient Heat Conduction Equation Solution for Accurate Quantification of Heat Transfer Coefficient in Transient Liquid Crystal Experiments

Use of a Thermographic Phosphor Fluorescence Imaging System for Simultaneous Measurement of Film Cooling Effectiveness and Heat Transfer Coefficient

Use of a laser-induced fluorescence thermal imaging system for local jet impingement heat transfer measurement