Ultrasonic displacement measurements from local absorption of ultrasound in thermochromic liquid crystal sensors
M. Turvey,O. Trushkevych,D.J. McKnight,R.S. Edwards
DOI: https://doi.org/10.1016/j.ultras.2024.107352
IF: 4.2
2024-05-25
Ultrasonics
Abstract:Wavefield imaging can be used for measuring the wavefield produced by an ultrasound transducer for medical and industrial applications, or for the detection and monitoring of defects in non-destructive testing. Typical wavefield imaging methods include interferometry/vibrometry, and the use of microphones and hydrophones. These involve scanning, making them time consuming, and microphones have limited resolution. An alternative method presented here uses thermochromic liquid crystal sensors which react to heat generated due to absorption of ultrasonic waves. The result is a colour scale that varies with temperature, with the temperature change dependent on ultrasonic displacement. Measurements of the resonant modes of a flexural ultrasonic transducer were taken between 320 kHz and 6.77 MHz. Temperature maps were obtained from photographs of the TLC sensor using the true-colour image processing method. The obtained temperature change across the transducer face was compared with displacement measurements taken using interferometry, showing excellent agreement in the position of the mode features and good resolution at lower frequencies. Thermal measurements were also taken to directly observe the heating of the transducer cap, showing the effect of the thermal conductivity of the transducer along with confirming the increased heat generated by the ultrasound absorption when a backing layer is used. The sensors show promise for fast transducer characterisation, with further potential applications in structural health monitoring and defect detection.
acoustics,radiology, nuclear medicine & medical imaging