Abstract:The film boiling of free-surface water flow over a moving hot steel sheet is a common occurrence in the run-out table (ROT) cooling process used in hot rolling mills in the steel industry. Engineers seek to optimize cooling operations, necessitating the comprehension of forced convective heat transfer characteristics between cooling water and hot steel sheets in the film-boiling regime. In this study, we developed an experimental methodology using an infrared camera to evaluate the heat flux distribution along a moving solid with a high spatial resolution. Specifically, a 0.5-mm-thick test sheet made of stainless steel was subjected to cooling by a water film flowing at 0.72 m/s. The surface heat flux was measured while varying the velocity of the test sheet (0.5, 1.0, and 1.5 m/s), temperature of the test sheet (450–590 °C), and water temperature (30–60 °C). The study revealed that the heat flux was highest in the region where the water first contacted with the moving solid and then decreased downstream. The peak values of the surface heat flux depended on the water temperature, but were almost independent of the moving velocity. We compared the results with the similarity solutions for single- and two-phase boundary layer theories to gain insights into the heat transfer mechanism and to discuss the effects of varying the examined parameters. In addition, we developed a correlation formula to predict the heat flux profile in the first contact region.

Evaluation of Heat Conduction and Visualization of Heat Flux in a Plate Making Use of Heat Transfer Experiments

Visualization Study on Temperature and Flow Fields of Natural Convection in a Parallelepiped Box

A Fundamental-Study of the Heat-Transfer and Flow Situation Around Spacers (A Single Row of Several Cylindrical Rods in Cross Flow)

Visualization of Flow and Temperature Fields of Natural Convection in a Hemisphere Heated from Below.

Experimental and numerical study of the effect of conjugate heat transfer on film cooling

Consideration of Heat Transfer Enhancement Mechanism Using Nano- and Micro-Scale Porous Layer

Effects of a Single Cubic-type Spacer on the Local Heat Transfer and the Flow in a Parallel Plate Duct.

Experiments on heat transfer of smooth and swirl tubes under one-sided heating conditions

Numerical Analysis of the Laminar Heat Transfer and Flow Situation Around a Square Rod Spacer in a Flow Passage.

Natural Convection to Air from an Array of Vertical Parallel Plates with Discrete and Protruding Heat Sources

Three-Dimensional Numerical Analysis of Mixed Convective Heat Transfer in a Horizontal Square Channel with Heated and Cooled Side Walls.

Experimental investigation of a flat plate heat pipe performance using IR thermal imaging camera

Movement of Impingement Heat Transfer by A Single Circular Jet with A Confined Wall

Improved Liquid-Crystal Thermometry Excluding Human Color Sensation

Visualization of Natural Convection in Enclosures with Complex Geometries by Thermo-Sensitive Liquid Crystal Particles Suspended in Fluids.

Consideration of Heat Transfer Enhancement Mechanism of Nano- and Micro-Scale Porous Layer Via Flow Visualization

A Method for Researching Natural Convection Heat Transfer from a Non-Isothermal Vertical Plate by Infra-Red Thermovision

Visualization and void fraction measurement of gas-liquid two-phase flow in plate heat exchanger

An Experimental Study of Natural Convection from an Array of Vertical Parallel Plates.

Conjugate Heat Transfer Analysis of Film Cooling Flows

Infrared camera-based analysis of heat flux distribution in film boiling of water flow over a moving steel sheet