Abstract:Rotating machinery requires adequate sealing to reducing the secondary leakage between high-pressure and low-pressure regions and in turn improve efficiency. Different types of annular gas seals are used for multiple turbomachinery applications. This includes finger, leaf, brush (for more specialized applications), hole and honeycomb patterned seals. In comparison to other configurations, labyrinth seals are most commonly used due to their high robustness and low manufacturing costs in rotating machinery applications. The recently introduced T-type labyrinth seal has the potential to reduce the fluid-induced excitations in the aero-engines in comparison to conventional ones. Seal clearance from the rotor surface plays an important role in the performance and efficiency of the seal in terms of rotor dynamics and leakage rate. Therefore, a parametric analysis is required to determine the optimal clearance which not only reduces the leakage but also minimizes the overall contribution to the vibration of the system. It is known that the T-type seals have T shape teeth which provide a greater increase in the inward radial aerodynamic force. This inward force is due to the enhanced Lomakin effect of the seal flow field. The earlier research has shown that the leakage of T-type labyrinth seal is approximately 23.6% to 25.3% less than the straight through (i.e., conventional) labyrinth seals by keeping the same tip clearance and axial length for the seal. This paper focuses on the sensitivity analysis using the design of experiments (DOE) along with the steady-state computational fluid dynamics (CFD) to determine the optimum tip clearance for the reduced leakage rate of a T-type labyrinth seal. Since the fluid-induced excitations play a significant role in the rotordynamic system, equivalent rotordynamic coefficients are extracted using steady-state CFD simulation based on the circular whirl orbit and perturbation analysis, where the small perturbation is applied to the rotor, which is generally 10% of the seal clearance. In this study, conventional labyrinth seal is numerically modelled, and then verified through test results existing in the literature. In addition, the numerical results are compared with existing simulation results in literature. The effective damping of conventional and T-type labyrinth seals is also calculated using the equivalent rotordynamic coefficients. The previous research on the T-type seals is used for benchmarking and validation of the analysis.

Aerodynamic analysis of straight-through labyrinth seal of the drum of an aeroengine

Performance Analysis of the Cylinder Gas Film Seal between Dual-Rotor Reverse Shafts Considering Lubrication and Centrifugal Expansion Effects

Numerical Calculation of Nonlinear Dynamic Characteristics for Labyrinth Seals

Numerical Analysis of Sealing Band on Valve Plate in Piston Pump

Dynamic Coefficient Analysis of Labyrinth Seal Based on FLUENT

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

The Wear of Seal Fins During High-Speed Rub Between Labyrinth Seal Fins and Honeycomb Stators at Different Incursion Rates.

Analysis on Airflow Induced Forces of Aero-Engine Rotor with Labyrinth Seal

Interaction Between Rotor and Annular Seals: Interlaced and Straight-Through Labyrinth Seals

Numerical and Experimental Investigations on Windage Heating Effect of Labyrinth Seals

A New Method to Realize Unsteady Calculation of Flow in Labyrinth Seals

Leakage and Rotordynamic Performance of T Type Labyrinth Seal

Numerical and Experimental Investigation on the Effect of Swirl Brakes on the Labyrinth Seals

Numerical Study of Leakage and Rotordynamic Performance of Staggered Labyrinth Seals Working with Supercritical Carbon Dioxide

Influence of Gas Condensability on Labyrinth Seal's Sealability

Numerical Investigation of Leakage Effects of Rub-grooves on Labyrinth Seal

Investigation and Improvement of the Staggered Labyrinth Seal

Dynamic Characteristics Numerical Calculation of Labyrinth Seal in Experimental Table by CFX

Determination of the Equivalent Rotordynamic Coefficients and Leakage of a T-Type Labyrinth Seal

Effects of Reynolds Number and Tooth Front Angle on Leakage Loss and Heat Transfer Characteristics in a Rotating Labyrinth Seal

THE EFFECT OF THE SHAPE OF LABYRINTH SEALS ON ROTOR DYNAMIC COEFFICIENTS