Abstract:The so-called in-vessel retention (IVR) was considered as a severe accident management strategy and had been certified by Nuclear Regulatory Commission (NRC) in U.S. as a standard measure for severe accident management since 1996. In the core meltdown accident, the reactor pressure vessel (RPV) integrity should be ensured during the prescribed time of 72 h. However, in traditional concept of IVR, several factors that affect the RPV failure were not considered in the structural safety assessment, including the effect of corium crust on the RPV failure. Actually, the crust strength is of significant importance in the context of a severe reactor accident in which molten core material melts through the reactor vessel and collects on the lower head (LH) of the RPV. Consequently, the RPV integrity is significantly influenced by the crust. A strong, coherent crust anchored to the RPV walls could allow the yet-molten corium to fall away from the crust as it erodes the RPV, therefore thermally decoupling the melt pool from the coolant and sharply reducing the cooling rate. Due to the thermal resistance of the crust layer, it somewhat prevents further attack of melt pool from the RPV. In the present study, the effect of crust on RPV structural behaviors was examined under multilayered crust formation conditions with consideration of detailed thermal characteristics, such as high-temperature gradient across the wall thickness. Thereafter, systematic finite element analyses and subsequent damage evaluation with varying parameters were petformed on a representative RPV to figure out the possibility of high temperature induced failures with the effect of crust layer.

Influence of the protective layer of polyvinylchloride resin on failure of LPG vessel caused by heat radiation

Blister Damage Evolution in Plastic Liner of Type IV Hydrogen Storage Vessel Studied by Fracture Mechanics

Effects of calculation parameters on the thickness of the protective layer of PVC resin resistant to fragments

Experimental Analysis on Residual Performance of Used 70 MPa Type IV Composite Pressure Vessels

Experimental Investigation on the Deformation and Damage of Steel Ribbon Wound Vessel for Hydrogen Storage under External Impact and Blast Loading

Dynamic Response Characteristics and Damage Modes of Multifunctional Layered Hydrogen Storage Vessels under Impact Loads

Influence of Protective Layer of Asbestos on Domino Effect Caused by Heat Radiation

The Influence of the Crust Layer on Rpv Structural Failure under Severe Accident Condition

Consequences analysis of the LPG tank truck traffic accident: A case study of the Wenling explosion accident

Analysis Of Fire-Induced Failure Of Lpg Tanks

Influence of the Protective Layer of Improved Polycarbonate on Domino Effect Risk Caused by Fragments

The Influence Of Crust Layer On Reactor Pressure Vessel Failure Under Pressurized Core Meltdown Accident

Failure analysis of a reinforced thermoplastic pipe used in an oil transportation system

Investigations on vapor cloud explosion hazards and critical safe reserves of LPG tanks

The Model of Thermal Response of Liquefied Petroleum Gas Tanks Partially Exposed to Jet Fire

Investigation on Structural Behaviors of Reactor Pressure Vessel with the Effects of Critical Heat Flux and Internal Pressure

Comparison between the effects of protective layers on domino effect risk caused by fragments

Mechanical Response of 16 MnR Tank Exposed to High Temperature (Fire)

Numerical investigation on performance of protective layer around large-scale chemical storage tank against impact by projectile

Experimental study of the dynamic response of PVB laminated glass under vented explosion loads of methane–air mixtures

Risk Assessment of Liquefied Petroleum Gas Explosion in a Limited Space