Abstract:The so-called in-vessel retention (IVR) was considered as a severe accident management strategy and had been certified by Nuclear Regulatory Commission (NRC) in U.S. as a standard measure for severe accident management since 1996. In the core meltdown accident, the reactor pressure vessel (RPV) integrity should be ensured during the prescribed time of 72 h. However, in traditional concept of IVR, several factors that affect the RPV failure were not considered in the structural safety assessment, including the effect of corium crust on the RPV failure. Actually, the crust strength is of significant importance in the context of a severe reactor accident in which molten core material melts through the reactor vessel and collects on the lower head (LH) of the RPV. Consequently, the RPV integrity is significantly influenced by the crust. A strong, coherent crust anchored to the RPV walls could allow the yet-molten corium to fall away from the crust as it erodes the RPV, therefore thermally decoupling the melt pool from the coolant and sharply reducing the cooling rate. Due to the thermal resistance of the crust layer, it somewhat prevents further attack of melt pool from the RPV. In the present study, the effect of crust on RPV structural behaviors was examined under multilayered crust formation conditions with consideration of detailed thermal characteristics, such as high-temperature gradient across the wall thickness. Thereafter, systematic finite element analyses and subsequent damage evaluation with varying parameters were petformed on a representative RPV to figure out the possibility of high temperature induced failures with the effect of crust layer.

Influence of Protective Layer of Asbestos on Domino Effect Caused by Heat Radiation

Influence of the protective layer of polyvinylchloride resin on failure of LPG vessel caused by heat radiation

Effect of Fire-Deck Thickness on Thermal Status of Cylinder Head

Influence of the Protective Layer of Improved Polycarbonate on Domino Effect Risk Caused by Fragments

Thermal-fluid-structure Coupling Progressive Failure Analysis for the Type III Composite Cylinder under Localized Fire

Comparison between the effects of protective layers on domino effect risk caused by fragments

Studying Probability of Domino Effect in Chemical Storage Tanks Using Hazard Index

The Influence of the Crust Layer on Rpv Structural Failure under Severe Accident Condition

Numerical Simulation of Thermal Response Behavior of Floating-Roof Tanks Exposed to Pool Fire

Modeling on Temperature Field of Arch Crown in Long Tunnel Fires

Ballistic experiments on the mechanism of protective layer against domino effect caused by projectiles

Effect of Welding Defects on Mechanical Properties of Welded Joints Subjected to Temperature

Fire Resistance of a Vertical Oil Tank Exposed to Pool-Fire Heat Radiation after High-Velocity Projectile Impact

Investigation on Multilayer Failure Mechanism of Rpv with A High Temperature Gradient from Core Meltdown Scenario

Numerical study of failure modes of hazardous material tanks exposed to fire accidents in the process industry

Escalation probabilistic model of atmospheric tank under coupling effect of thermal radiation and blast wave in domino accidents

Study on Domino Probability of Spherical Tank Based on New Failure Model

The Influence Of Crust Layer On Reactor Pressure Vessel Failure Under Pressurized Core Meltdown Accident

Could Pool Fire Alone Cause a Domino Effect?

TRANSIENT BEHAVIORS OF HEAVY METALLIC LAYER AND EFFECTS OF PR ON THE HEAT TRANSFER CHARACTERISTICS

Coupling Effects of the Fragment Impact and Adjacent Pool-Fire on the Thermal Buckling of a Fixed-Roof Tank