Abstract:GaN/InGaN light emitting diodes(LEDs)grown on sapphire substrates have current transport along the lateral direction.This often results in non-uniform current spreading,which leads to the non-uni-formity of luminescence and the reduction of lifetime.Therefore,proper mesa structure should be designed to improve current spreading.The characteristics of the GaN/InGaN LED have been examined from the view point of uniform current spreading and low series resistance.A steady-state current field model is employed to describe the current spreading of GaN based LED.Finite element method is used to simulate the current distribution of different types of LEDs in three dimensions.The series resistance of the LED is derived from the calculated current spreading.Standards to quantitatively evaluate the uniformity of current spreading are presented.By quantitatively comparing the series resistance and current spreading of LEDs with different mesa structures,we find that that the LED with the interdigitated mesa structure has the lowest series resistance under the process conditions of our lab.Parameters of the interdigitated mesa structure are further optimized based on our model to achieve the smallest series resistance.Two types of LEDs,denoted as Sample A and Sample B,are prepared with a chip size of 1 mm×1 mm.Sample A is fabricated using the optimized interdigitated electrode pattern as described above,while Sample B is fabricated using a ring electrode pattern without optimization for comparison.By measuring the I-V curve,the values of series resistance of the three samples are derived,which are 1.6 Ω and 3.6 Ω for Sample A and Sample B,respectively.The resistance of the former one is only 44.4% of the latter one,which is consistent with the calculated results based on our model.The reduction in resistance will lead to the improvement of the efficiency of LEDs.

Thermal Simulation and Analysis of Flat Surface Flip-Chip High Power Light-Emitting Diodes

Simulation and Analysis of Thermal Property of GaN-based Flip-chip Light-emitting Diodes

Analysis of thermal spreading resistance in high power LED package and its design optimization

Thermal Analysis and Design of High-Power LED Street Light

Comprehensive Thermal Characterization Using Ruby R Fluorescence Lines of Sapphire and Gane2-High Raman Mode from Raman Spectra in High-Power Flip-Chip Ingan/Gan Leds

Junction temperature and reliability of high-power flip-chip light emitting diodes

Bump Thermal Management Analysis of LED with Flipchip Package

Thermal Analysis of High Power Gan-Bawd Light Emitting Diode

Analysis of Junction Temperatures in High-Power GaN-based LEDs

Improving the External Quantum Efficiency of High-Power GaN-Based Flip-Chip LEDs by Using Sidewall Composite Reflective Micro Structure

A Thermal Analysis of the Operation of Microscale, Inorganic Light-Emitting Diodes

Thermal Analysis of Flip-Chip Bonding Designs for GaN Power HEMTs with an On-Chip Heat-Spreading Layer

Study on LED array heat transfer under natural convection based on CFD

Enhancement of the Light Extraction Efficiency of Flip-Chip Light-Emitting Diodes Fabricated on Patterned Silicon Carbide and Sapphire Substrates

Improving the External Quantum Efficiency of High Power GaN Based Flip-Chip LEDs Using Ag/SiO2/DBR/SiO2 Composite ReflectiveStructure

Thermal Design of GaN-based High-power LED Module

Finite Element Model of GaN Based LED and the Optimization of the Mesa Structure

Impact of the LED chips placement and heat sink design on the multi-chip LED bump performance by the thermal and optical simulation

Finite Element Thermal Analysis For High Power Multi-Chip Light Emitting Diode

Thermal Dispersion of GaN-based Power LEDs

Simulation on Thermal Characteristics of LED Chips for Design Optimization