Abstract:In light ice-covered areas, icing of composite insulators with different pollution degree has great influence on their insulation performance. In this paper, the solid layer pollution method was adopted to realize different degrees of pre-pollution for six kinds of FXBW-220/160 composite insulators. Then, with the reference ice thickness of 10 mm as the standard, icing and AC flashover tests were carried out on insulators under the multi-functional artificial climate chamber. The ice weight and minimum flashover voltage ( Umf )of insulators under different pollution degrees were obtained, and the path of flashover arc was recorded. In addition, the maximum withstand voltage gradient equation of insulators under different discharge probabilities was established. The results show that when insulators are energized icing, the ice weight decreased with the increase of salt deposit density (SDD), which in turn causes the Umf to decrease. The relationship between the Umf and SDD is negative power function regardless of whether the insulators are energized icing or not. The differences in arc path, residual ice layer resistance, and the ratio of air gap arc to ice surface arc are the main reason for affecting the flashover voltage. In addition, the maximum withstand voltage gradient E α at discharge probability α% of 10%, 5%, and 0.13% when the insulators are energized icing decreases with the increase of SDD, and E 10 > E 5 > E 0.13 . Increasing the spacing and diameter of the largest shed of composite insulators and reasonably cooperating with medium/small sheds can help to significantly improve their flashover performance. The results of this paper can provide data support for the selection and optimal design of insulators for 220 kV transmission lines in light ice-covered areas.

Influence of Icing Degree on AC Icing Flashover Performance of Porcelain, Glass and Composite Insulators

Comparison on ac icing flashover performance of porcelain, glass, and composite insulators

Influence of Icing Degree on DC Icing Flashover Performance of Composite Insulator

Comparison on DC Icing Flashover Performance of Porcelain, Glass, and Composite Insulators

Effect of Icing on the Ac Flashover Voltage of 220kv Composite Insulators

Effects of icing degree on ice growth characteristics and flashover performance of 220 kV composite insulators

Effect of Test Methods on AC Flashover Performance of Iced Porcelain Insulator String

DC Flashover Performance of Various Types of Ice-Covered Insulator Strings under Low Air Pressure

Comparison of AC Icing Flashover Performance of 110 Kv Composite Insulators

AC Flashover Voltage and Arc Development of Long Insulators Strings in Natural Icing Environment

Influence of Polluting Methods on Icing and Flashover Characteristics of 220 kV Composite Insulators Under AC Working Voltage

Influence of Voltage Types on Composite Insulator Icing and Flashover Characteristics

Influence of AC Electrical Field on 220 Kv Composite Insulators Icing and Flashover Characteristics

Effect of electrical test methods on dc flashover performance of ice-covered ceramic insulators

AC Icing Flashover Performance of Post Insulator ZS-126/4

AC Icing Flashover Characteristics and Maximum Withstand Voltage Gradient of 220kv Polluted Composite Insulators

DC Flashover Performance of Ice-Covered Insulators under Complex Ambient Conditions

Study On Icing Of Energized Insulators With Ac Service Voltage And Electrical Performance

Study of the effect of ice adhesion on electrical power transmission insulator

Study of DC Flashover Performance of Ice-Covered Insulators at High Altitude

Study on the Icing Flashover Characteristics of Porcelain Double Sheds Suspension Insulator String