Abstract:Organosoluble polyimide/silica hybrid materials were prepared via the sol–gel process and their pervaporation properties were studied. The organosoluble polyimide (PI) was based on 4,4′-oxydiphthlic dianhydride (ODPA) and 4,4′-diamino-3,3′-dimethyldiphenylmethane (DMMDA). The surface chemical structure of polyimide/silica films was analyzed by Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS) and the results show that the completely hydrolysis of alkoxy groups of precursors and formation of the three-dimensional Si–O–Si network in the hybrid films. The morphology and the silica domain thus obtained were studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. The silica particle size in the hybrid is in the range of 40–100nm for the hybrid films when the amount of silica is less than 20wt%. The strength and the modulus of the hybrid films are improved and the mechanical properties were found to be strongly dependent on the density of the crosslink. The glass transition temperature (Tg) of the hybrid films was determined by dynamic mechanical analysis (DMA) and the value increased 15–20°C as the silica content increased. Furthermore, the pervaporation performances of the prepared hybrid films were also investigated for the ethanol/water mixtures at different temperature.

Preparation of Silica Hybrid Films on PMMA by Sol-Gel and Solvothermal Methods

PMMA–silica hybrid thin films with enhanced thermal properties prepared via a non-hydrolytic sol–gel process

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Preparation and Atomic Oxygen Erosion Resistance of Silica Films Formed on Polymethyl Methacrylate by Solvothermal Method

Modification of Optical Waveguide Material PMMA with Nano-Silicon by Sol-Gel Approach

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Preparation of Pmma/Sio2 Composite Particles Via Emulsion Polymerization

Preparation and Properties Investigation of Pmma/Silica Composites Derived from Silicic Acid

Surface‐modified Silica Nanoparticles for Reinforcement of PMMA

Preparation and properties of hydrophobic organic-inorganic silica hybrid films

Preparation of Transparent Ultrahydrophobic Silica Film by Sol–gel Process

On The Silica/Pmma Nanocomposites

Characterization and Optical Properties of Sol–gel Processed PMMA/SiO2 Hybrid Monoliths

Preparation and Morphology of SiO 2 /PMMA Nanohybrids by Microemulsion Polymerization

Preparation of Inorganic Nanoparticles/Polyimide Hybrid Film by Sol Gel Method

Preparation of Organically Modified Silica Sols and Hydrophobic Films

MICROPOROUS SILICA FILMS DERIVED BY SOL-GEL GRANULAR SILICA SOL

Interaction and Microstructure of Polyurethane/Silica Hybrid Films Prepared by Sol-Gel Process

Microstructure and Properties of Organosoluble Polyimide/silica Hybrid Films

Preparation of Hydrophobic Optical Silica Thin Film with Sol-gel Method

High Refractive Index Films Prepared from Titanium Chloride and Methyl Methacrylate Via a Non-Aqueous Sol–Gel Route