Abstract:Organosoluble polyimide/silica hybrid materials were prepared via the sol–gel process and their pervaporation properties were studied. The organosoluble polyimide (PI) was based on 4,4′-oxydiphthlic dianhydride (ODPA) and 4,4′-diamino-3,3′-dimethyldiphenylmethane (DMMDA). The surface chemical structure of polyimide/silica films was analyzed by Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS) and the results show that the completely hydrolysis of alkoxy groups of precursors and formation of the three-dimensional Si–O–Si network in the hybrid films. The morphology and the silica domain thus obtained were studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. The silica particle size in the hybrid is in the range of 40–100nm for the hybrid films when the amount of silica is less than 20wt%. The strength and the modulus of the hybrid films are improved and the mechanical properties were found to be strongly dependent on the density of the crosslink. The glass transition temperature (Tg) of the hybrid films was determined by dynamic mechanical analysis (DMA) and the value increased 15–20°C as the silica content increased. Furthermore, the pervaporation performances of the prepared hybrid films were also investigated for the ethanol/water mixtures at different temperature.

Interaction and Microstructure of Polyurethane/Silica Hybrid Films Prepared by Sol-Gel Process

Silica/polyimide Hybrids and Their Dielectric Properties. I. Preparation with an Improved Sol–gel Process with Poly(amic Acid) As the Precursor

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Structure and Mechanical Properties of Polyurethane/Silica Hybrid Coatings

Structure and Properties of Polyurethane/nanosilica Composites

Preparation and Characterization of Polyester/Silica Nanocomposite Resins

Microstructure and Properties of Polyester-Based Polyurethane/titania Hybrid Films Prepared by Sol–gel Process

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

Preparation and characterization of nanocomposite polyurethane.

Characterization and Properties of UV‐curable Polyurethane‐acrylate/silica Hybrid Materials Prepared by the Sol‐gel Process

Microstructure and Properties of Organosoluble Polyimide/silica Hybrid Films

In Situ Polymerization and Characterization of Polyester‐based Polyurethane/nano‐silica Composites

Film-Formation of Polyacrylate/Silica Composite Latexes by Sol-Gel Process

Preparation and Characterization of PDMS Emulsion/Silica Gel Hybrid Water Dispersions

Film-forming Properties of Waterborne Polyurethane Film Modified by Soy Protein Isolate/Silica

Comparison of Hybrid Polyimide Films with Silica and Organosilica Obtained Via Sol–gel Process

Preparation of hybrid polyurethane–silica composites by a lateral sol-gel process using tetraethyl orthosilicate

Preparation of Silica Hybrid Films on PMMA by Sol-Gel and Solvothermal Methods

Preparation of Solvent-borne Acrylic-based Polyurethane-Modified Silica Nanocomposites

Microstructure and Properties of Triethoxysilylpropylamine-Capped Polyurethane/Titania Hybrid Films