Abstract:Organic-inorganic hybrid sols were synthesized from nano silica particles dispersed in water and from organoalkoxysilanes, using the sol-gel reaction. This work focuses on the effects of the three multifunctional organoalkoxysilanes dimethyldimethoxysilane (DMDMS), methyltrimethoxysilane (MTMS), and tetramethoxysilane (TMOS) to form a transparent and high-thermal-resistance coating film. The stability of the hybrid sol was evaluated as a function of the reaction time for 10 d through the variation of the viscosity. The viscosity of the silica/DMDMS and silica/MTMS sol was slightly increased for 10 d. The multifunctional organoalkoxysilanes formed dense silica networks through hydrolysis and condensation reaction, which enhanced the thermal resistance of the coating films. No thermal degradation of the silica/DMDMS sample occurred up to 600 degrees C, and none of the silica/MTMS and silica/TMOS samples occurred either up to 700 degrees C. The organic-inorganic hybrid sols were coated on the glass substrate using a spin-coating procedure. The organic-inorganic hybrid sols formed flat coating films without cracks. The transmittance of the hybrid sol coating films using MTMS and DMDMS was shown to be over 90%. The transmittance of the silica/TMOS sol coating film reacted for 10 d abruptly decreased due to faster gelation. The silica/DMDMS and silica/MTMS hybrid sols formed smooth coating films while the surface roughness of the silica/TMOS coating film markedly increased when the hybrid sol reacted for 10 d. The increase of the surface roughness of the silica/TMOS coating film can be attributed to the degradation of the stability of the hybrid sol and to the loss of transmittance of the coating film. It was confirmed in this study that the use of organic-inorganic hybrid sol can yield transparent and high-thermal-resistance coating films.

Preparation and properties of hydrophobic organic-inorganic silica hybrid films

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Silica/polyimide Hybrids and Their Dielectric Properties. I. Preparation with an Improved Sol–gel Process with Poly(amic Acid) As the Precursor

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Microstructure and Properties of Organosoluble Polyimide/silica Hybrid Films

Preparation and Properties of Methyl-Situ-modified Sol-Gel Hydrophobic Anti-Reflective SiO2 Coating

Fabrication and Properties of Thermosensitive Organic/inorganic Hybrid Hydrogel Thin Films.

Synthesis of organic-inorganic hybrid sols with nano silica particles and organoalkoxysilanes for transparent and high-thermal-resistance coating films using sol-gel reaction

Preparation and Thermal Stability of Polyorganosiloxane Superhydrophobic Film by Sol-Gel Method

Preparation and Properties of Superhydrophobic Fluoroalkylsilane Coatings

Superhydrophobic silica films by sol–gel co-precursor method

Controllable Preparation Of Ultra-Low-Dielectric Nanoporous Silica Via Inorganic-Organic Hybrid Templates

Polyimide/silica/titania Nanohybrids Via a Novel Non-Hydrolytic Sol–gel Route

High Refractive Organic–Inorganic Hybrid Films Prepared by Low Water Sol-Gel and UV-Irradiation Processes

Trialkoxysilane‐capped Acrylic Resin/titania Organic–inorganic Hybrid Optical Films Prepared by the Sol–gel Process

Comparison of Hybrid Polyimide Films with Silica and Organosilica Obtained Via Sol–gel Process

Preparation of high hardness hydrophobic SiO2 anti reflective thin films from mixed acid catalyzed and alkali catalyzed sols

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

PREPARATION OF TRANSPARENT ABRASION-RESISTANT ORGANIC-INORGANIC HYBRID FILM

Synthesis, structural and morphological characteristics of (P(MA-MPTMS)/SiO2 hybrid nanocomposites

Sol-gel synthesis of biocompatible silica-chitosan hybrids and hydrophobic coatings