Abstract:The addition of nanostructures to polymeric materials allows for a direct interaction between polymeric chains and nanometric structures, resulting in a synergistic process through the physical (electrostatic forces) and chemical properties (bond formation) of constituents for the modification of their properties and potential cutting-edge materials. This study explores a novel in situ synthesis method for PDMS-%SiO2 nanoparticle composites with varying crosslinking degrees (PDMS:TEOS of 15:1, 10:1, and 5:1); particle concentrations (5%, 10%, and 15%); and sol-gel catalysts (acidic and alkaline). This investigation delves into the distinct physical and chemical properties of silicon nanoparticles synthesized under acidic (SiO2-a) and alkaline (SiO2-b) conditions. A characterization through Raman, FT-IR, and XPS analyses confirms particle size and agglomeration differences between both the SiO2-a and SiO2-b particles. Similar chemical environments, with TEOS and ethanol by-products, were detected for both systems. The results on polymer composites elucidate the successful incorporation of SiO2 nanoparticles into the PDMS matrix without altering the PDMS's chemical structure. However, the presence of nanoparticles did affect the relative intensities of specific vibrational modes over composites from −35% to 24% (Raman) and from −14% to 59% (FT-IR). The XPS results validate the presence of Si, O, and C in all composites, with significant variations in atomic proportions (C/Si and O/Si) and Si and C component analyses through deconvolution techniques. This study demonstrates the successful in situ synthesis of PDMS-SiO2 composites with tunable properties by controlling the sol-gel and crosslinking synthesis parameters. The findings provide valuable insights into the in situ synthesis methods of polymeric composite materials and their potential integration with polymer nanocomposite processing techniques.

Synthesis, structural and morphological characteristics of (P(MA-MPTMS)/SiO2 hybrid nanocomposites

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Silica/polyimide Hybrids and Their Dielectric Properties. I. Preparation with an Improved Sol–gel Process with Poly(amic Acid) As the Precursor

Preparation and Morphology of SiO 2 /PMMA Nanohybrids by Microemulsion Polymerization

Synthesis and characterizations of novel, positively charged poly(methyl acrylate)–SiO2 nanocomposites

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Synthesis and Characterization of Nanocomposite of Polyimide-Silica Hybrid from Nonaqueous Sol-Gel Process

Synthesis and Characterization of PMMA-ZrO2 (SiO2, TiO2, Al2O3) Organic-Inorganic Hybrid Materials

Structural design and synthesis of PMDA-6FHP-DRl/SiO2 hybrid nanomaterial

Synthesis and Film Performances of SiO2/P(MMA-BA) Core–shell Structural Latex

Synthesis of silica-carbon nanocomposite templated by PEO-b-PAN polymeric micelles

Synthesis And Characterization Of Polyimide/Silica Hybrid Waveguide Materials Via Sol-Gel Technique

Sol–gel derived organic–inorganic hybrid from trialkoxysilane-capped acrylic resin and titania: effects of preparation conditions on the structure and properties

Synthesis and Characterization of PMMA-ZrO<sub>2</sub>(SiO<sub>2</sub>,TiO<sub>2</sub>,Al<sub>2</sub>O<sub>3</sub>) Organic-Inorganic Hybrid Materials

Polyimide/silica/titania Nanohybrids Via a Novel Non-Hydrolytic Sol–gel Route

Structure and Characterization of POM/SiO2 Nanocomposites Prepared by In-Situ Polymerization

Synthesis of UV-Cured Silicone Resin/Silica Nanocomposites from UV-Curable Polysilisiquioxane and Methacrylate-Functionalized Silica

A Novel In Situ Sol-Gel Synthesis Method for PDMS Composites Reinforced with Silica Nanoparticles

Microstructure and Properties of Organosoluble Polyimide/silica Hybrid Films

Preparation and Characterization of Trialkoxysilane‐Containing Acrylic Resin/Alumina Hybrid Materials

Methyltrimethoxysilane Hybrid Film Reinforced by Silica Sol Particles with Surface Modification