Abstract:The mechanism for the formation of double-layer vertically aligned carbon nanotube arrays (VACNTs) through single-step CVD growth is investigated. The evolution of the structures and defect concentration of the VACNTs are tracked by scanning electron microscopy (SEM) and Raman spectroscopy. During the growth, the catalyst particles are stayed constantly on the substrate. The precipitation of the second CNT layer happens at around 30 min as proved by SEM. During the growth of the first layer, catalyst nanoparticles are deactivated with the accumulation of amorphous carbon coatings on their surfaces, which leads to the termination of the growth of the first layer CNTs. Then, the catalyst particles are reactivated by the hydrogen in the gas flow, leading to the precipitation of the second CNT layer. The growth of the second CNT layer lifts the amorphous carbon coatings on catalyst particles and substrates. The release of mechanical energy by CNTs provides big enough energy to lift up amorphous carbon flakes on catalyst particles and substrates which finally stay at the interfaces of the two layers simulated by finite element analysis. This study sheds light on the termination mechanism of CNTs during CVD process.Graphical AbstractThe mechanism for the formation of double-layer vertically aligned carbon nanotube arrays (VACNTs) through single-step CVD growth was investigated. The growth of the second CNT layer lifts the amorphous carbon coatings on catalyst particles and substrates.

Regulation on the thickness of aligned carbon nanotube arrays

J2240204 Evaluation of the Properties and Alignment of Carbon Nanotube Sheet Grown by CVD Method

The Fabrication of Macroscopical Long Aligned Carbon Nanotube Arrays

The Fabrication And Characterization Of N-Doped Aligned Carbon Nanotube Arrays In Large Area

Study of Controlled Growth of Carbon Nanotubes in Microstructures at Low Temperature

Chemical Vapor Deposition of Vertically Aligned Carbon Nanotube Arrays: Critical Effects of Oxide Buffer Layers

Investigation on the Formation Mechanism of Double-Layer Vertically Aligned Carbon Nanotube Arrays via Single-Step Chemical Vapour Deposition

Growth Process Conditions of Vertically Aligned Carbon Nanotubes Using Plasma Enhanced Chemical Vapor Deposition

Influence of Catalyst Film Thickness Deposited by Atomic Layer Deposition on the Growth of Aligned Carbon Nanotubes

Study of Growth Kinetics of Ultra-Long Carbon Nanotube Arrays Through Wall Number Statistical Investigation

Uniform Patterned Growth of Carbon Nanotubes Without Surface Carbon

Growth Mechanism and Kinetics of Vertically Aligned Carbon Nanotube Arrays

Mass Production of Aligned Carbon Nanotube Arrays by Fluidized Bed Catalytic Chemical Vapor Deposition

Thermal chemical vapor deposition of layered aligned carbon-nanotube films separated by graphite layers

Pretreatment Control of Carbon Nanotube Array Growth for Gas Separation: Alignment and Growth Studied Using Microscopy and Small-Angle X-ray Scattering.

Effect of catalyst particle interspacing on the growth of millimeter-scale carbon nanotube arrays by catalytic chemical vapor deposition

Distortion of carbon nanotube array and its influence on carbon nanotube growth and termination

Layered Growth of Aligned Carbon Nanotubes Arrays on Silicon Wafers

Fabrication and Characterization of Aligned Cnt/C Composites

Influence of Catalyst Thickness on Diameters of Carbon Nanotubes

Facile Synthesis of High Density Carbon Nanotube Array by a Deposition-Growth-densification Process