Abstract:Titanium carbides attract attention from both academic and industry fields because of their intriguing mechanical properties and proven potential as appealing candidates in the variety of fields such as nanomechanics, nanoelectronics, energy storage and oil/water separation devices. A recent study revealed that the presence of Ti8C5 not only improves the impact strength of composites as coatings, but also possesses significant strengthening performance as an interlayer material in composites by forming strong bonding between different matrices, which sheds light on the design of impact protection composite materials. To further investigate the impact resistance and strengthening mechanism of Ti8C5, a pilot Molecular Dynamics (MD) study utilizing comb3 potential is carried out on a Ti8C5 nanosheet by subjecting it to hypervelocity impacts. The deformation behaviour of Ti8C5 and the related impact resist mechanisms are assessed in this research. At a low impact velocity ~0.5 km/s, the main resonance frequency of Ti8C5 is 11.9 GHz and its low Q factor (111.9) indicates a decent energy damping capability, which would eliminate the received energy in an interfacial reflection process and weaken the shock waves for Ti8C5 strengthened composites. As the impact velocity increases above the threshold of 1.8 km/s, Ti8C5 demonstrates brittle behaviour, which is signified by its insignificant out-of-plane deformation prior to crack initiation. When tracking atomic Von Mises stress distribution, the elastic wave propagation velocity of Ti8C5 is calculated to be 5.34 and 5.90 km/s for X and Y directions, respectively. These figures are inferior compared with graphene and copper, which indicate slower energy delocalization rates and thus less energy dissipation via deformation is expected prior to bond break. However, because of its relatively small mass density comparing with copper, Ti8C5 presents superior specific penetration. This study provides a fundamental understanding of the deformation and penetration mechanisms of titanium carbide nanosheets under impact, which is crucial in order to facilitate emerging impact protection applications for titanium carbide-related composites.

High-pressure Strength of Nanocrystalline Tantalum Carbide (tac) Studied at a Non-Hydrostatic Compression

Compressibility And Strength Of Nanocrystalline Tungsten Boride Under Compression To 60gpa

Atomistic Investigation of Titanium Carbide Ti8C5 under Impact Loading

Nanostructured Diamond-Tic Composites with High Fracture Toughness

Effects of Tantalum Concentration on the Microstructures and Mechanical Properties of Tungsten-Tantalum Alloys

Elasticity, mechanical and thermal properties of polycrystalline hafnium carbide and tantalum carbide at high pressure

Sintering and densification mechanisms of tantalum carbide ceramics

High-pressure Raman Scattering and X-Ray Diffraction Studies of MgTa2O6

High pressure sintering of fully dense tantalum carbide ceramics with limited grain growth

Pressure and Temperature-Dependent Optical Properties of TiTa2O7

Nanocrystalline Tungsten Carbide: As Incompressible As Diamond

Strength And Elastic Moduli Of Tin From Radial X-Ray Diffraction Under Nonhydrostatic Compression Up To 45 Gpa

Dislocation-mediated ultrahigh mechanical properties in nano-TiN

The Rate Sensitivity and Plastic Deformation of Nanocrystalline Tantalum Films at Nanoscale

Rapid densification and mechanical properties of ultra-high-pressure sintered transition metal carbide ceramics

Thermomechanics of nanocrystalline nickel under high pressure-temperature conditions.

Interstitial carbon induced FCC-Ti exhibiting ultrahigh strength in a Ti37Nb28Mo28-C7 complex concentrated alloy

Effects of Tantalum on Microstructure Evolution and Mechanical Properties of High-Nb TiAl Alloys Reinforced by Ti2AlC

Sound velocity measurements of tantalum under shock compression in the 10-110 GPa range

Structure prediction and mechanical properties of tantalum carbide (TaC) on ab initio level

Mechanical properties and high-pressure behavior of high entropy carbide (Mo, Nb, Ta, V, W)C