Abstract:Sintering titanium (Ti) materials to high densities while maintaining fine grain sizes is a great challenge, which severely restrains their engineering application. Herein, we fabricated a high-density and fine-grain Ti material by a small addition of CaB 6 via powder metallurgy (PM) pressureless sintering route. The effect of CaB 6 addition on the grain growth kinetics and sintering densification mechanism were systematically investigated. The CaB 6 oxygen-scavenger breaks the surface oxide layer and promotes the mutual diffusion of Ti atoms during sintering, resulting in the in-situ formation of nano-sized CaTiO 3 particles and increase the sintered density. Moreover, the micro-sized TiB whiskers with the length from 10 μm to 30 μm and width from 1 μm to 4 μm are also formed in the Ti matrix. The grain microstructure of Ti/CaB 6 composite displays a random orientation feature with the fine and uniform equiaxed crystallites. The presence of in situ TiB and CaTiO 3 second-phase particles makes a greater grain growth activation energy Q for Ti/CaB 6 composites, from the 373 kJ/mol of pure Ti to the 522 kJ/mol of Ti-1.0CaB 6 composite, creating a smaller grain size. The grain refining effect by CaB 6 addition is more effective at high temperature. As a result, the grain size of Ti-1.0CaB 6 composite sintered at 1300 °C/2 h is only 74 μm, much smaller than the 163 μm of pure Ti. This study offers a feasible way to produce the high-density and fine-grain Ti materials.

High pressure sintering of fully dense tantalum carbide ceramics with limited grain growth

Sintering and densification mechanisms of tantalum carbide ceramics

Rapid densification and mechanical properties of ultra-high-pressure sintered transition metal carbide ceramics

Pressureless sintering and properties of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics: The effect of pyrolytic carbon

Strengthening Hf0.95Ta0.05B2 Ceramic With Ultrafine Grains and High-density Dislocations

New Route to Densify Tantalum Carbide at 1400 °C by Spark Plasma Sintering

Investigation of the microstructure and physical properties of TaSi 2 sintered at high temperature and high pressure

Crack tolerant TaC–SiC ceramics prepared by spark plasma sintering

Multifunctional tantalum disilicide ceramics sintered at high temperature and high pressure

Microstructure and mechanical properties of TaC ceramics with 1–7.5 mol% Si as sintering aid

Microstructure and mechanical properties of the spark plasma sintered Ta2C ceramics

Interface Structure and Grain Growth Behavior of Ta 4 HfC 5 -Si 2 BC 3 N Complex Ceramic

Elasticity, mechanical and thermal properties of polycrystalline hafnium carbide and tantalum carbide at high pressure

Densification, Microstructure and Mechanical Properties of Multicomponent (tizrhfnbtamo)c Ceramic Prepared by Pressureless Sintering

Influence of TiC content on microstructure and mechanical properties of (Ta, Ti)C ceramics

Nanocrystalline high‐entropy carbide ceramics with improved mechanical properties

Low-temperature densification of high-entropy (Ti,Zr,Nb,Ta,Mo)C—Co composites with high hardness and high toughness

Fabrication of highly dense Ti3SiC2 ceramics by pressureless sintering of mechanically alloyed elemental powders

Grain Growth Kinetics and Densification Mechanism of (tizrhfvnbta)c High-Entropy Ceramic under Pressureless Sintering

Grain growth kinetics and densification mechanism of Ti/CaB 6 composites by powder metallurgy pressureless sintering

Densification of tantalum carbide ceramics with 5 mol.% Al, Cu, Ag and Au