Abstract:<p>The yield strength of metals is typically governed by the average grain size through the Hall-Petch relation, and it usually follows the rule of mixture (ROM) for layered composite materials. In the present study, an extraordinarily high yield strength, far beyond the predicted values from the Hall-Petch relation and the ROM, is achieved in a specially designed layered titanium that is characterized by alternating coarse- and fine-grain layers (C/F-Ti) where the grain sizes match the layer thicknesses in both the coarse- and fine-grained layers. The strengthening mechanism of such a layered C/F-Ti is investigated based on detailed experimental characterizations, including nanoindentation tests of local hardness, in-situ synchrotron Laue X-ray microdiffraction (μXRD) measurement of the lattice strain distribution during tensile testing, and transmission electron microscopy (TEM) analysis of the dislocation structure after yielding. In the coarse-grain layers, significantly higher hardness values are observed next to the layer interfaces compared to the layer center regions, and <c+a> dislocations and densely populated pile-ups of <a> dislocations are exclusively observed in the interface regions after yielding. These experimental results point to an enhanced interface constraint effect on the deformation mechanism in hexagonal close-packed (hcp) materials with a large difference in the critical resolved shear stress between <a> slip and <c+a> slip. The C/F-Ti combines the strength of fine grains and the ductility of coarse grains, demonstrating a new structural design strategy for property optimization of single-phase hcp materials.</c+a></a></a></c+a></p>

Dislocation-mediated ultrahigh mechanical properties in nano-TiN

Atomistic Mechanisms of Ultralarge Bending Deformation of Single-Crystalline TiO2–B Nanowires

In Situ Atomic-Scale Study on the Ultralarge Bending Behaviors of TiO2-B/Anatase Dual-Phase Nanowires.

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

The Effects of Morphology and Temperature on the Tensile Characteristics of Carbon Nitride Nanothreads.

Understanding the Role of 1/2 ⟨110⟩ Dislocations in Deformation Mechanisms of Single-Crystal High-Entropy Carbide Ceramics from Machine Learning Force Field Simulations

Microstructure Evolution-Dominated Mechanical Properties of Pure Titanium under Nanoindentation

Elucidating dislocation core structures in titanium nitride through high-resolution imaging and atomistic simulations

Thermomechanics of nanocrystalline nickel under high pressure-temperature conditions.

Strength And Elastic Moduli Of Tin From Radial X-Ray Diffraction Under Nonhydrostatic Compression Up To 45 Gpa

Molecular dynamics simulation on the deformation mechanism of monocrystalline and nano-twinned TiN under nanoindentation

Dislocation mechanisms of low-temperature plasticity of nanocrystalline titanium: The role of impurity and grain boundary strengthening

The Microstructures and Deformation Mechanism of Hetero-Structured Pure Ti under High Strain Rates

Deformation strengthening mechanism of in situ TiC/TC4 alloy nanocomposites produced by selective laser melting

In-situ high energy X-ray diffraction study of deformation behavior in Nb nanoparticle-martensitic NiTi composite wire

Deformation mechanism and mechanical properties of TiN/ZrN nanolaminates by nanoindentation: effect of layer thickness and temperature

Nanoindentation simulation study on mechanical properties and microstructure evolution of twin γ-TiAl alloy

Comparative Studies of Constitutive Properties of Nanocrystalline and Bulk Iron During Compressive Deformation

Enhanced strength in pure Ti via design of alternating coarse- and fine-grain layers

Molecular dynamics simulation and experimental study on nanoindentation response of polycrystalline γ-TiAl alloy

Strain hardening mechanism induced by basal/pyramidal dislocation reactions in a 3D-printed high-strength titanium alloy