Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Bearing Capacity of Reactive Powder Concrete Reinforced by Steel Fibers

Experimental Research the Shearing Performance of Grading-Fiber Reinforced Reactive Powder Concrete

Experimental Study on the Spalling Strength of Fiber Reactive Powder Concrete

Experimental investigation on the dynamic tensile behavior of graded steel-fiber RPC

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Ultimate Bearing Capacity of Steel-Reactive Powder Concrete Composite Beams

Experiment and validation of local bearing capacity for reactive powder concrete confined with high-strength spirals

Experiment and Analysis of Local Compression Bearing Capacity of Reactive Powder Concrete

Effect of Fibers on High-Temperature Mechanical Behavior and Microstructure of Reactive Powder Concrete

Effect of different fibers (steel fibers, glass fibers, and carbon fibers) on mechanical properties of reactive powder concrete

Experimental and Numerical Study on the Performance of Steel-Coarse Aggregate Reactive Powder Concrete Composite Beams with Uplift-Restricted and Slip-Permitted Connectors under Negative Bending Moment

Experimental Study on Dynamic and Static Mechanical Properties of Steel Fiber Reinforced Concrete

Influence of Rpc Grouting Materials on Shear Behavior of Wet Joints in Pcsbs with Confining Stress

Experimental study on flexural toughness of different fiber RPC

Study on Mechanical Properties and Microstructure of Basalt Fiber Reactive Powder Concrete

Bond-slip behavior between reactive powder concrete and H-shaped steel

Research on the Bonding Performance of BFRP Bars with Reactive Powder Concrete

Fracture and Self-Sensing Characteristics of Super-Fine Stainless Wire Reinforced Reactive Powder Concrete

The Mechanical and Self-Sensing Performance of Reactive Powder Cement Concrete with Nano-Stainless Steel Powder

Investigation of the Match Relation Between Steel Fiber and High-Strength Concrete Matrix in Reactive Powder Concrete.

Steel Rebar Effect on Tensile and Cracking Behavior of UHPFRC Based on Direct Tensile Tests and Digital Image Correlation