Uniaxial Compressive Stress-Strain Behavior of Alkali Activated Steel Slag Powder-Based Reactive Powder Concrete (SSP-RPC)

Guohua Sheng,Shengji Jin,Chao Li,Quan Bai

DOI: https://doi.org/10.1016/j.conbuildmat.2024.139038

IF: 7.4

2024-01-01

Construction and Building Materials

Abstract:Steel slag is a byproduct of steel smelting that poses a threat to the environment and takes up valuable land resources. The high cement content in reactive powder concrete (RPC) goes against the direction of low-carbon development in the concrete industry. To address this issue, ultra-high content steel slag powder (SSP) was used to replace cement (replacement ratio Rs≥ 50 %) and a sodium sulfate activator was added to create a low carbon RPC, referred to as SSP-RPC. The uniaxial compressive performances of SSP-RPC with varying replacement ratio of SSP for cement Rs and volume fraction of steel fiber ρv under short-term and long-term curing methods were investigated in this paper. The results show that the axial compressive strength meet the strength requirements for high-strength concrete. As RS increases, the peak stress σcp, peak strain εcp, elastic modulus Ec, and energy dissipation all decrease. With an increase in ρv, the σcp and Ec initially increase and then decrease, with a threshold value of ρv =2 %. Both εcp and energy dissipation show an increasing trend. Except for εcp, all performance indicators are higher in long-term curing method compared with short-term curing method. An analysis of the stress-strain response relationship in uniaxial compression was conducted, and three typical response line models were established for the different of RS and ρv. The accuracy of existing uniaxial compressive stress-strain prediction models under two curing methods were compared, and a modified model suitable for SSP-RPC was developed.