Abstract:The realization of electrospinning‐derived oxide nanofiber‐based transistors composed of In2O3 and ZnO has been reported. By controlling the doping level in nanofibers, significant enhancement in both the electron mobility and thin‐film transistor (TFT) stress stability have been demonstrated. Current findings elucidate the significant advance of electrospinning‐derived oxide nanofiber‐based transistors toward practical applications for future low‐cost and high‐performance electronics. Although In2O3 nanofibers (NFs) are regarded as one of the active channel materials for next‐generation, low‐cost thin‐film transistors (TFTs), these NFs‐based devices still suffer from the degraded carrier mobility and operational instability, limiting the ability of such devices to replace current polycrystalline silicon technologies. Here, it is shown that nanofiber channel transistors with high electron mobility and operational stability can be achieved by selectively doping Zn element into electrospun In2O3 NFs. By precisely manipulating the doping level during NFs fabrication, their crystallinity, surface morphology, and corresponding device performance can be regulated reliably for enhanced transistor performances. It has been detected that InZnO/SiO2 TFTs with an optimized Zn doping concentration of 50% have demonstrated the high field‐effect mobility (μFE) of 6.38 cm2 V−1 s−1, the larger ION/IOFF of 4.12 × 107 and operation in the energy‐efficient enhancement‐mode. Low frequency noise (LFN) measurements have displayed that the scattering and defects inside the NFs are effectively suppressed by the particular microstructure. When integrating ALD‐derived Al2O3 films as the gate dielectric into TFTs devices, their electron mobility and ION/IOFF can be further improved to 37.82 cm2 V−1 s−1 and 2.92 × 108, respectively. To demonstrate the potential toward more complex logic applications, a low voltage resistor‐loaded unipolar inverter is built by using InZnO/Al2O3 TFT, exhibiting a high gain of 20.95 and full swing characteristics. These optimized parameters have demonstrated the significant advance of this electrospinning technique toward practical applications for high performance and large‐scale electronics.

Electrohydrodynamic Direct-Writing ZnO Nanofibers for Device Applications

ZnO Nanofiber Field‐Effect Transistor Assembled by Electrospinning

A General Approach For Fabricating Arc-Shaped Composite Nanowire Arrays By Pulsed Laser Deposition

ZnO Nanowire and $\hbox{ws}_{2}$ Nanotube Electronics

A General Approach for Fabricating Arc‐Shaped Composite Nanowire Arrays by Pulsed Laser Deposition

Large‐Scale Direct‐Writing of Aligned Nanofibers for Flexible Electronics

Electrohydrodynamic Direct Writing Platform Based on Near-Field Electrospinning

Electrohydrodynamic Direct-Write Micro/Nano Pattern with the Restriction of Inducing Tip

Direct writing of suspended nanowires using coaxial electrohydrodynamic jet with double tip assistance

Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube

Versatile, Kinetically Controlled, High Precision Electrohydrodynamic Writing of Micro/nanofibers

Direct-writing organic three-dimensional nanofibrous structure

Draw Spinning of Wafer‐Scale Oxide Fibers for Electronic Devices

Fabrication of ZnO Nanowire Devices Via Selective Electrodeposition

Direct-Write Micro/Nano-Structure for Flexible Electronic Manufacturing

Electrospinning‐Driven Binary Oxide Nanofiber Networks with Tunable Amorphous Microstructure for Booming Transistors and Circuits Operation

Microscale electrohydrodynamic printing of in situ reactive features for patterned ZnO nanorods

Fabrication of Lateral Electrodes on Semiconductor Nanowires Through Structurally Matched Insulation for Functional Optoelectronics.

Electrospinning-Driven Dual-Channel-Based Field-Effect Transistors by Heterojunction Architecture

Electrohydrodynamic Direct‐Writing Micro/Nanofibrous Architectures: Principle, Materials, and Biomedical Applications (Adv. Healthcare Mater. 28/2024)

Electrospun Ordered Nanofibers on Si and SiO2 Substrate