Abstract:This research aimed to develop a direct-write near-field electrospinning system (DW-NFES) with three-axis positioning of controllable speed, torque and position to produce sizable and high-quality piezoelectric fibers for sensing purposes. Sensor devices with high electrical response signals were developed and tested. To achieve DW-NFES purpose, a servo motor controller was designed to develop a high response rate, accurate positioning, and stable mobile device through the calculation of bandwidth and system time delay. With this retooled system of DW-NFES, controllable and uniform size fibers in terms of diameters, stretching force, and interspaces can be obtained. Sensor devices can be made selectively without a complicated lithography process. The characteristics of this DW-NFES platform were featured by high response rate, accurate positioning, and stable movement to make fibers with high piezoelectric property. In this study, polyvinylidene fluoride (PVDF) was used to explore and enhance their sensing quality through the platform. The parametric study of the process factors on piezoelectric sensing signals mainly included the concentration of electrospinning PVDF solution, high voltage electric field, and collection speed. Finally, the surface morphology and piezoelectric properties of the as-electrospun PVDF fibers were examined by scanning electron microscopy (SEM) and characterized by electrical response measurement techniques. The results showed that the fiber spinning speed of the DW-NFES system could be increased to ~125 from ~20 mm/s and the accuracy precision was improved to ~1 from ~50 μm, compared to conventional step motor system. The fiber diameter reached ~10 μm, and the electrospinning pitch reached to as small as ~10 μm. The piezoelectric output voltage of the electrospun fibers was increased ~28.6% from ~97.2 to ~125 mV; the current was increased ~27.6% from ~163 to ~208 nA, suggesting that the piezoelectric signals can be enhanced significantly by using this retooled system. Finally, an external control module (Arduino-MAGE) was introduced to control the PVDF piezoelectric fiber sensors integrated as a sensing array. The behavior of long-term sedentary patients can be successfully detected by this module system to prevent the patients from the bedsores.

Direct-Write Micro/Nano-Structure for Flexible Electronic Manufacturing

Continuous Micron-Scaled Rope Engineering Using a Rotating Multi-Nozzle Electrospinning Emitter

Direct Writing of Submicron Lines Using the Micro-and Nanofiber Pens

Laser Direct Writing Using Submicron-Diameter Fibers.

Subwavelength-resolution Direct Writing Using Submicron-Diameter Fibers

Direct-Write, Self-Aligned Electrospinning on Paper for Controllable Fabrication of Three-Dimensional Structures.

Direct wire writing technique benefitting the flexible electronics

Fabrication of Heterogeneous Scaffolds Using Melt Electrospinning Writing: Design and Optimization

2D and 3D Electrospinning of Nanofibrous Structures by Far-Field Jet Writing

Near-field electrospinning for 2D and 3D structuring: Fundamentals, methods, and applications

Fabrication of electrostatic-induction-assisted solution blowing spinning nanofibers and its mechanism

Electro-spinning/netting: A strategy for the fabrication of three-dimensional polymer nano-fiber/nets

Electrospinning Evolution Derived from TRIZ Theory for Directly Writing Patterned Nanofibers

Effective Method for High-Throughput Manufacturing of Ultrafine Fibres Via Needleless Centrifugal Spinning

Continuous Draw Spinning of Extra-Long Silver Submicron Fibers with Micrometer Patterning Capability

Enhancement of PVDF Sensing Characteristics by Retooling the Near-Field Direct-Write Electrospinning System

Finite element method assisted design of needleless electrospinning systems for mass production of polymer nanofibers

Near-Field Electrospinning for Three-Dimensional Stacked Nanoarchitectures with High Aspect Ratios

Electrospinning for Depositing Orderly Nanofiber Patterns

Direct write micro/nano optical fibers by near-field melt electrospinning

Controllable Generation of Nanofibers Through a Magnetic-Field-assisted Electrospinning Design