Abstract:The process of melt electrospinning has received noteworthy attention due to its ability to fabricate micro scaled polymer fibers. Recently, a melt electrospinning process has been attracting attention for biomedical applications, in particular with scaffold fabrication for tissue engineering. In order to enhance cell attachment and proliferation on scaffolds, it is important to control fiber diameters to create an environment to which cells can attach, grow, and proliferate with ease. However, because electrospinning is a process with many parameters, it is particularly difficult to precisely control the diameter of the resulting fibers. Also, polymer powders or pellets melted in nozzles are typically used for melt electrospinning. However, a filament feeding melt electrospinning process has not been yet been implemented. In this study, we developed a melt electrospinning device which can feed PCL (Polycaprolactone, Mw: 80 000 g mol−1) filaments for advanced electrospun fiber diameter control. The PCL filaments were first fabricated by a small scale micro-compounder and then fed into the melting chamber of the electrospinning device. The system was then heated to a desired temperature, and the melt was extruded through a nozzle. The potential difference between the nozzle and counter electrode then drew down the PCL extrudate, creating fine microfibers. Temperature was controlled and monitored via a customized temperature control system. In order to control the dispensing of the PCL filaments, a customized control algorithm using NI (National Instruments) LabVIEW was used. In order to actively cool PCL filaments, a miniature computer fan was attached on the side of the melting chamber so that the filaments would not buckle. This paper reveals the investigation of significant process parameters that influence fiber diameters and their optimization. For instance, applied voltages, distances between the nozzle and a counter electrode, processing temperatures, and polymer resin flowrates were varied. We also studied and summarized the effect of duty cycle—a ratio of forward and backward motions of the filament within a cycle time—for advanced fiber diameter control. Moreover, the relationship between a flow rate and a duty cycle and their influences on a fiber diameter were studied.

Continuous Micron-Scaled Rope Engineering Using a Rotating Multi-Nozzle Electrospinning Emitter

Designer Fibers from 2D to 3D – Simultaneous and Controlled Engineering of Morphology, Shape and Size

Non-concentric multi-compartment fibers fabricated using a modified nozzle in single-step electrospinning

Aqueous-Based Coaxial Electrospinning of Genetically Engineered Silk Elastin Core-Shell Nanofibers

Impact of Substrate Geometry on Electrospun Fiber Deposition and Alignment

Fabricating and controlling PCL electrospun microfibers using filament feeding melt electrospinning technique

Fabrication of Microropes via Bi-electrospinning with a Rotating Needle Collector.

Controlling Mechanical Properties of Medical-Grade Scaffolds through Electrospinning Parameter Selection

Highly controlled multiplex electrospinning

Optimization Design of a Multi-String Standing Wave Electrospinning Apparatus Based on Electric Field Simulations

Three-dimensional rope-like and cloud-like nanofibrous scaffolds facilitating in-depth cell infiltration developed using a highly conductive electrospinning system

Fabrication of micro-hollow fiber by electrospinning process in near-critical carbon dioxide

A Novel Electrospinning Setup for the Fabrication of Thickness-Controllable 3D Scaffolds with an Ordered Nanofibrous Structure

Multi-compartment Centrifugal Electrospinning Based Composite Fibers

A Step Forward in Tissue Engineering Design: Control on Multi-Scale Fiber Alignment by Electrospinning

Design and fabrication of tubular scaffolds via direct writing in a melt electrospinning mode

A General Strategy to Electrospin Nanofibers with Ultrahigh Molecular Chain Orientation

Continuous aligned polymer fibers produced by a modified electrospinning method

The Challenge of E-Spinning Sub-Millimeter Tubular Scaffolds—A Design-of-Experiments Study for Fiber Yield Improvement

Fabrication of poly (ϵ-caprolactone) microfiber scaffolds with varying topography and mechanical properties for stem cell-based tissue engineering applications

Fabrication of electrostatic-induction-assisted solution blowing spinning nanofibers and its mechanism