Abstract:Zinc Oxide (ZnO) nanorods have great potential in several applications including gas sensors, light-emitting diodes, and solar cells because of their unique properties. Here, three low cost and ecofriendly techniques were used to produce ZnO nanorods on FTO substrates: hydrothermal, chemical bath deposition (CBD), and electrochemical deposition (ECD). This study explores the impact of such methods on the optical, structural, electrical, morphological, and photoelectrochemical properties of nanorods using various measurements. XRD analysis confirmed the hexagonal wurtzite structure of ZnO nanorods in all three methods, with hydrothermal showing a preferred orientation (002) and CBD and ECD samples showing multiple growth directions, with average particle sizes of 31 nm, 34 nm, and 33 nm, respectively. Raman spectra revealed hexagonal Wurtzite structure of ZnO, with hydrothermal method exhibiting higher E 2 (high) peak at 438 cm −1 than CBD and ECD methods. SEM results revealed hexagonal ZnO nanorods became more regular and thicker for the hydrothermal method, while CBD and ECD led to less uniform with voids. UV-vis spectra showed absorption lines between 390 nm and 360 nm. Optical bandgap energies were calculated as 3.32 eV, 3.22 eV, and 3.23 eV for hydrothermal, CBD, and ECD samples, respectively. PL spectra revealed UV emission band with a small intensity peak around 389 nm and visible emission peaks at 580 nm. Temperature dependent PL measurements for ZnO nanorods indicated that the intensities ratio between bound exciton and free exciton decreases with temperature increases for the three methods. Photocurrent measurements revealed ZnO nanorod films as n-type semiconductors, with photocurrent values of 2.25 μA, 0.28 μA, and 0.3 μA for hydrothermal, CBD, and ECD samples, and photosensitivity values of 8.01, 2.79, and 3.56 respectively. Our results suggest that the hydrothermal method is the most effective approach for fabricating high-quality ZnO nanorods for optoelectronic applications.

Microscale electrohydrodynamic printing of in situ reactive features for patterned ZnO nanorods

Effects of Electrodeposition Electrolyte Concentration on Microstructure, Optical Properties and Wettability of ZnO Nanorods

Nonlithographic Fabrication of Nanostructured Micropatterns Via Breath Figures and Solution Growth

Effect of Electrodeposition Time on Microstructure, Wettability and Optical Properties of ZnO Nanorod Arrays

Controllable Heterogeneous Nucleation for Patterning High‐Quality Vertical and Horizontal ZnO Microstructures toward Photodetectors

Thermal-desorption Induced Enhancement and Patterning of Ultraviolet Emission in Chemically Grown ZnO

Subtractive Patterning of Nanoscale Thin Films Using Acid‐Based Electrohydrodynamic‐Jet Printing

Low-cost fabrication methods of ZnO nanorods and their physical and photoelectrochemical properties for optoelectronic applications

Highly Ordered Growth of ZnO Nanostructures by Combination of Nanoimprint Lithography and Hydrothermal Method

Large Scale Fabrication Of Periodical Bowl-Like Micropatterns Of Single Crystal Zno

Precursor-Based ZnO Nano Inks for Printed Electronics**Research supported by a Zhejiang Provincial Natural Science Foundation of China (No. LQ21F010003 to H.D), a China Postdoctoral Science Foundation (No. 2020M681952 to H.D) and Youth Science Fund Project of Zhejiang Lab (No. 2020MCOAA04 to H.D)

Electrohydrodynamic printing for high resolution patterning of flexible electronics toward industrial applications

The Effect of the Solution Flow and Electrical Field on the Homogeneity of Large-Scale Electrodeposited ZnO Nanorods

Controlled Preparation of Micron-Size-Pattemed ZnO Nanowire Field Emitters

Local Control of Zno Nanorods Growing on Microstructures with an External Electric-Field Assistance

Architecting three-dimensional ZnO nanorods

Studies of Electrochemical Synthesis of Ultrathin ZnO Nanorod/Nanobelt Arrays on Zn Substrates in Alkaline Solutions of Amine−Alcohol Mixtures

Patterning Nanoparticles by Microcontact Printing and Further Growth of One-Dimensional Nanomaterials

Laser-assisted electrohydrodynamic jet printing of hierarchical nanostructure

Ordered growth of metal oxides in patterned multi-angle microstructures

Preparation of microstructured ZnO nanorod photoelectrode