Abstract:Uniform, large-scale, and well-aligned needle-like ZnO nanorods with good photoluminescence and photocatalysis properties on Zn substrates, have been successfully fabricated using a simple low-temperature seed-layer growth approach in solution (50 °C). The formation of ZnO seed-layer by the anodic oxidation technique (AOT) plays an important role in the subsequent growth of highly oriented ZnO nanorods arrays. Temperature also proved to be a significant factor in the growth of ZnO nanorods and had a great effect on their optical properties. X-ray diffraction (XRD) analysis, selected-area electron diffraction (SAED) pattern and high-resolution TEM (HRTEM) indicated that the needle-like ZnO nanorods were single crystal in nature and that they had grown up preferentially along the [0001] direction. The well-aligned ZnO nanorods arrays on Zn substrates exhibited strong UV emission at around 380 nm at room temperature. To investigate their potential as photocatalysts, degradation of pentachlorophenol (PCP) in aqueous solution was carried out using photocatalytic processes, with comparison to direct photolysis. After 1 h, the degradation efficiencies of PCP by direct photolysis and photocatalytic processes achieved 57% and 76% under given experimental conditions, respectively. This improved degradation efficiency of PCP illustrates that ZnO nanorods arrays on Zn substrates have good photocatalytic activity. This simple low-temperature seed-layer growth approach in solution resulted in the development of an effective and low-cost fabrication process for high-quality ZnO nanorods arrays with good optical and photocatalytic properties that can be applicable in many fields such as photocatalysis, photovoltaic cells, luminescent sensors, and photoconductive sensors.

Studies of Electrochemical Synthesis of Ultrathin ZnO Nanorod/Nanobelt Arrays on Zn Substrates in Alkaline Solutions of Amine−Alcohol Mixtures

Conversion of large-scale oriented ZnO rod array into nanotube array under hydrothermal etching condition via one-step synthesis approach

Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube

Electrochemical Route to the Synthesis of Ultrathin ZnO Nanorod/nanobelt Arrays on Zinc Substrate

Arrays of ZnO Nanowires Fabricated by a Simple Chemical Solution Route

Controllable Synthesis of Well-Aligned Zno Nanorod Arrays on Varying Substrates Via Rapid Electrodeposition

Direct Electrodeposition of ZnO Nanotube Arrays in Anodic Alumina Membranes

Non-Aqueous Cathodic Electrodeposition of Large-Scale Uniform Zno Nanowire Arrays Embedded in Anodic Alumina Membrane

Fabrication of Arrays of Zinc Oxide Nanorods and Nanotubes in Aqueous Solution under an External Voltage

ZnO Nanorod Arrays: Field-assisted Growth in Aqueous Solution and Field Emission Properties

Large-Scale and Rapid Synthesis of Ultralong ZnO Nanowire Films via Anodization

Density-controlled Growth and Passivation of ZnO Nanorod Arrays by Electrodeposition

Zno Nanocrystal Arrays Fabricated From Ammonia Solution System

A facile route to ZnO nanorod arrays using wet chemical method

Well-ordered ZnO Nanotube Arrays and Networks Grown by Atomic Layer Deposition

Growth of Arrayed Nanorods and Nanowires of ZnO from Aqueous Solutions

Controllable Fabrication and Photocatalytic Activity of Zno Nanobelt Arrays

Mechanism and Optimized Process Conditions of Forming One-Dimensional ZnO Nanorods with Al-Doping by Electrodeposition Method

Fabrication of needle-like ZnO nanorods arrays by a low-temperature seed-layer growth approach in solution

Vertically Aligned 1D ZnO Nanostructures on Bulk Alloy Substrates: Direct Solution Synthesis, Photoluminescence, and Field Emission

Fabrication and optical properties of large-scale uniform zinc oxide nanowire arrays by one-step electrochemical deposition technique