Abstract:A printed electronics route for integration of ultrathin chips (chip‐scale) and nanowires (nanoscale) based electronic layers on the same flexible substrate is reported. Direct transfer printing is used for the integration of the ultrathin chips, contact printing is utilized for the integration of the nanowires‐based layers, and the direct ink write method is used for the fabrication of the electrodes/interconnects. Flexible hybrid electronics (FHE) offers potential for fast computation and communication needed in applications such as human–machine interfaces, electronic skin, etc. FHE typically comprises devices that can vary from nano‐ to chip scale, and their integration using a common process is often challenging. Herein, a printed electronics route is presented to integrate the ultrathin chips (chip‐scale) and nanowires (NWs)‐based electronic layers (nanoscale) on the same substrate. The fabrication process is categorized into three stages: i) direct transfer printing of ultrathin chips (UTCs), ii) contact printing of nanoscale structures, and iii) metal printing using the direct ink write (DIW) method to define electrodes/interconnects. The UTC printing process is carefully optimized by studying the performance of transistors present on them. Electrical data collected from 14 transistors located on 3 different chips show negligible variation in performance after they are transfer printed—thus confirming the efficacy of the printing technique. The superior grade quality of ZnO‐NWs‐based electronic layers printed on the same substrate is also demonstrated by constructing UV photodetectors using DIW printing. The photodetectors show high responsivity (≈2 × 107 A W−1) and specific detectivity (≈5 × 1015 Jones) at a low UV intensity of 0.5 μW cm−2.

Precursor-Based ZnO Nano Inks for Printed Electronics**Research supported by a Zhejiang Provincial Natural Science Foundation of China (No. LQ21F010003 to H.D), a China Postdoctoral Science Foundation (No. 2020M681952 to H.D) and Youth Science Fund Project of Zhejiang Lab (No. 2020MCOAA04 to H.D)

Ultra-high Precision Nano Additive Manufacturing of Metal Oxide Semiconductors Via Multi-Photon Lithography

Fully Printed Flexible Zinc Oxide Patch for Wearable UV Light Sensing

Functional Metal Oxide Ink Systems for Drop-on-Demand Printed Thin-Film Transistors

Development of Silver Nanoparticle Ink for Printed Electronics

Microscale electrohydrodynamic printing of in situ reactive features for patterned ZnO nanorods

3D Printing Nano‐Architected Semiconductors Based on Versatile and Customizable Metal‐Bound Composite Photoresins

3D Nanoprinting of Heterogenous Metal Oxides with High Shape Fidelity

A Generalized Polymer Precursor Ink Design for 3D Printing of Functional Metal Oxides

Photoreactive and Metal-Platable Copolymer Inks for High-Throughput, Room-Temperature Printing of Flexible Metal Electrodes for Thin-Film Electronics.

Sponge-templated Production of Ultra-Thin ZnO Nanosheets for Printed Ultraviolet Photodetectors

Topology-Mediated Molecule Nucleation Anchoring Enables Inkjet Printing of Organic Semiconducting Single Crystals for High-Performance Printed Electronics

Fully Printed Flexible Zinc Oxide Patch for Wearable UV Light Sensing (Adv. Electron. Mater. 12/2023)

Reactive Sintering of Cu Nanoparticles at Ambient Conditions for Printed Electronics

Facile Preparation of Monodisperse Cu@Ag Core–Shell Nanoparticles for Conductive Ink in Printing Electronics

Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics

Recent Advances in Inkjet Printing Synthesis of Functional Metal Oxides

Room Temperature Electrochemical Sintering of Zn Microparticles and Its Use in Printable Conducting Inks for Bioresorbable Electronics

Printing of Nano‐ to Chip‐Scale Structures for Flexible Hybrid Electronics

Droplet-Based Techniques for Printing of Functional Inks for Flexible Physical Sensors

Unraveling the Steric Link to Copper Precursor Decomposition: A Multi-Faceted Study for the Printing of Flexible Electronics