Abstract:The CoFeCu coating was electrodeposited onto a silicon substrate from a sulfate solution containing organic additives (saccharin and sodium acetate). The effects of deposition time and metal ion concentration in the bath on the magnetic and microstructural properties were studied. The deposited films were characterized by scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), atomic force microscopy (AFM), and vibrating sample magnetometer (VSM) measurements. Composition analysis revealed that different ternary Co 72 Fe 15 Cu 13 , Co 81 Fe 10 Cu 9 , and Co 77 Fe 18 Cu 5 samples were obtained when the deposition times were varied. The SEM images of the CoFeCu samples exhibited a compact surface comprising finer grain agglomerates. The Co 77 Fe 18 Cu 5 samples plated at longer deposition times showed the formation of nano-voids compared to the Co 72 Fe 15 Cu 13 and Co 81 Fe 10 Cu 9 samples plated at shorter deposition times. In all samples, the fcc(Co) phase was dominant. From the magnetic analysis, good soft magnetic properties were obtained, with a coercivity of 6 Oe and a saturation magnetization of 1494 emu/cm 3 (1.87 T) for the Co81Fe10Cu9 sample. Increasing the concentration of cobalt ions and decreasing the concentrations of iron and copper ions in the electroplating solution improved the soft magnetic properties of the CoFeCu deposit. The composition of the CoFeCu deposit changed as the concentration of cobalt ions was increased in the electroplating solution. The Co 81 Fe 10 Cu 9 sample had a higher saturation magnetization (MS) of 2005 emu/cm 3 (2.5 T) and an acceptable lower coercivity of 19 Oe. This work successfully fabricated CoFeCu thin films with good soft magnetic properties on a Si substrate.

Electro-deposition method's influence to ferrosilicon organization

Reaction of Iron with Amorphous Silicon and Crystal Silicon for the Fabrication of Iron Silicides

Electrodeposited Silica Films Post-Treated with Organosilane Coupling Agent As the Pretreatment Layers of Organic Coating System

Distribution and Morphology of α-Al, Si and Fe-Rich Phases in Al-Si-Fe Alloys under an Electromagnetic Field

Electroless Co-P Alloy Plating of Superfine Si3N4 Powders

Microstructure and Texture Evolution of Strip-Cast and Hot-Rolled Fe-3 %si Steel Sheet

Microstructure and texture evolution of strip casting 3 wt% Si non-oriented silicon steel with columnar structure

Electromagnetic levitation and solidification of ferrosilicon alloy and resulting microstructural evolution mechanisms

A comprehensive study on texture evolution and recrystallization mechanism of Fe-4.5 wt% Si with strong {114}

Evolution of surface morphology, roughness and texture of tungsten disilicide coatings on tungsten substrate

Influence of deposition parameters on the electrodeposited ternary CoFeCu coatings

Pattern Selection Induced By Electroconvection In The Electrodeposition Of Iron

The Evolution of Cube Texture in Directionally Solidified Fe-3.0 wt. % Si Alloy Assisted by a High Static Magnetic Field

Development of Λ-Fiber Recrystallization Texture and Magnetic Property in Fe–6.5wt% Si Thin Sheet Produced by Strip Casting and Warm Rolling Method

Influence of metallic impurities on oxygen precipitation in Czochralski-grown silicon

Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

Effects of Si solution in θ-Al13Fe4 on phase transformation between Fe-containing intermetallic compounds in Al alloys

Electropulsing Induced Texture Evolution in the Recrystallization of Fe-3 Pct Si Alloy Strip

Study of Fe deposition onto root 3 x root 3-Al/Si(111) template by scanning tunneling microscopy

Fabrication of high permeability non-oriented electrical steels by increasing 〈001〉 recrystallization texture using compacted strip casting processes

Development of thin-gauge low iron loss non-oriented silicon steel