Abstract:With the development of the vehicle and Diesel engine technology, the selective catalytic reduction (SCR) technology has been paid more attention recently, which is one of the most effective approaches for reducing the nitrogen oxides (NOx) emissions of Diesel engine exhaust. The control strategy of the ammonia coverage ratio of SCR catalyst is vitally important, which directly influences the NOx reduction efficiency and ammonia leakage. To solve such a challenging task, some assumptions are given firstly based on the understanding of the SCR nonlinear dynamic characteristics, and then the SCR nonlinear model is established by the Continuous Stirred Tank Reactor (SCTR) method. The ammonia storage characteristics are studied based on the established model. Then, the stability and observability of the SCR model are analyzed. For the unmeasurable ammonia coverage ratio and storage capacity of catalyst, a state observer based on the extended Kalman filter (EKF) is proposed. The structure of the closed-loop control system and the corresponding model predictive control (MPC) are designed to improve the robustness of the closed-loop system. The SCR test bench performed on the European Steady Cycle (ESC) and European Transient Cycle (ETC) operating condition is performed for the experimental validation of the control strategy. Meanwhile, a comparison between the proposed method and a feedforward control strategy based on MAP is provided to demonstrate the advantage of this closed-loop feedback control method based on EKF and MPC. The experimental results show that the closed-loop control system can effectively reduce the Diesel NOx emissions and avoid the secondary pollution caused by the ammonia leakage which is applicable to the actual Diesel SCR aftertreatment system.

The Model Based Control Strategy for an Advanced UREA-SCR System

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Model-based NH3 Adaptation Method for SCR Control

Closed-Loop Control Strategy and State Estimator for Diesel Engine SCR After-Treatment System

Model-based Closed-loop Control of Urea SCR Exhaust Aftertreatment System for Diesel Engine

Modelling and control of urea-SCR systems through the triple-step non-linear method in consideration of time-varying parameters and reference dynamics

Model Predictive Control: A Unified Approach for Urea-Based SCR Systems

Model-Based Estimation and Control System Development in a Urea-SCR Aftertreatment System

Ammonia coverage ratio control of a novel two-cell SCR-DeNOX system configuration based on IA-ISMC

Study of Control Strategy for Urea-SCR After-Treatment System of Heavy Duty Diesel Engine

Experimental investigation of urea injection strategy for close-coupled SCR aftertreatment system to meet ultra-low NO<i><sub>x</sub></i> emission regulation

Development of Map based Open Loop Control Algorithm for Urea - SCR System

Intein-mediated rapid purification of Cre recombinase.

Development and verification of model predictive control strategy for selective catalytic reduction with rapid prototyping

A temporal discretization and spatial integration SCR model with dual temperature-related parameters

Prediction and Control of the Nitrogen Oxides Emission for Environmental Protection Goal Based on Data-Driven Model in the SCR De-Nox System

Zonal Control for Selective Catalytic Reduction System Using a Model-Based Multi-Objective Genetic Algorithm

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst