Abstract:With the development of the vehicle and Diesel engine technology, the selective catalytic reduction (SCR) technology has been paid more attention recently, which is one of the most effective approaches for reducing the nitrogen oxides (NOx) emissions of Diesel engine exhaust. The control strategy of the ammonia coverage ratio of SCR catalyst is vitally important, which directly influences the NOx reduction efficiency and ammonia leakage. To solve such a challenging task, some assumptions are given firstly based on the understanding of the SCR nonlinear dynamic characteristics, and then the SCR nonlinear model is established by the Continuous Stirred Tank Reactor (SCTR) method. The ammonia storage characteristics are studied based on the established model. Then, the stability and observability of the SCR model are analyzed. For the unmeasurable ammonia coverage ratio and storage capacity of catalyst, a state observer based on the extended Kalman filter (EKF) is proposed. The structure of the closed-loop control system and the corresponding model predictive control (MPC) are designed to improve the robustness of the closed-loop system. The SCR test bench performed on the European Steady Cycle (ESC) and European Transient Cycle (ETC) operating condition is performed for the experimental validation of the control strategy. Meanwhile, a comparison between the proposed method and a feedforward control strategy based on MAP is provided to demonstrate the advantage of this closed-loop feedback control method based on EKF and MPC. The experimental results show that the closed-loop control system can effectively reduce the Diesel NOx emissions and avoid the secondary pollution caused by the ammonia leakage which is applicable to the actual Diesel SCR aftertreatment system.

Control Model of Urea-SCR System for Diesel Engine

Modeling and Simulation of Commercial Catalytic Reformers

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

Closed-Loop Control Strategy and State Estimator for Diesel Engine SCR After-Treatment System

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Study of Control Strategy for Urea-SCR After-Treatment System of Heavy Duty Diesel Engine

Development and verification of model predictive control strategy for selective catalytic reduction with rapid prototyping

Model-Based Estimation and Control System Development in a Urea-SCR Aftertreatment System

Model Predictive Control: A Unified Approach for Urea-Based SCR Systems

Model-based Closed-loop Control of Urea SCR Exhaust Aftertreatment System for Diesel Engine

Model-based fault detecting strategy of urea-selective catalytic reduction (SCR) for diesel vehicles

Model-based NH3 Adaptation Method for SCR Control

Modelling and control of urea-SCR systems through the triple-step non-linear method in consideration of time-varying parameters and reference dynamics

Multi-Scale SCR Modeling, 1D Kinetic Analysis and 3D System Simulation

A temporal discretization and spatial integration SCR model with dual temperature-related parameters

Black Box SCR Modeling and Control for Small CI Engines

Modeling and simulation of marine SCR system based on Modelica

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Luenberger-Sliding Mode Observer Based Backstepping Control for the SCR System in a Diesel Engine