Abstract:Electrostatic adhesion, as a promising actuation technique for soft robotics, severely suffers from the failure caused by the unpredictable electrical breakdown. This study proposes a novel self-clearing mechanism for electrostatic actuators, particularly for electrostatic adhesion. By simply employing an enough thin conductive layer (e.g., <7 μm for copper), this method can spontaneously clear the conductor around the breakdown sites effectively once breakdowns onset and survive the actuator shortly after the electrical damage. Compared with previous self-clearing methods, which typically rely on new specific materials, this mechanism is easy to operate and compatible with various materials and fabrication processes. In our tests, it can improve the maximum available voltage by 260% and the maximum electrostatic adhesive force by 276%. In addition, the robustness and repeatability of the self-clearing mechanism are validated by surviving consecutive breakdowns and self-clearing of 173 times during 65 min. This method is also demonstrated to be capable of recovering the electrostatic pad from severe physical damages such as punctures, penetrations, and cuttings successfully and enabling stable and reliable operation of the electrostatic clutch, or gripping, for example, even after the short-circuit takes place for hundreds of times. Therefore, the proposed self-clearing method sheds new light on high performance and more extensive practical applications of electrostatic actuators in the future.

The design of micro electrostatic structure with low driving voltage

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

A regulated charge pump with wide current driving capability for low-voltage applications

Tri-electrode MEMS electrostatic actuator with lower control voltage and higher stroke for actuator array implementations

Nanoelectromechanical Switch with Low Voltage Drive

Design and Fabrication of a Metal-Silicon Actuator With Low Voltage, Low Power Consumption and Large Displacement

Experimental analysis of a low controlling voltage tri-electrode MEMS electrostatic actuator for array applications

On the Driving Mechanism Design for Large Amplitude Electrostatic Actuation

A Novel Low-Voltage Non-Resonant Piezoelectric Linear Actuator Based on Two Alternative Principles

Laterally driven electrostatic repulsive-force microactuators using asymmetric field distribution

Low Power Linear Actuator for Direct Drive Electrohydraulic Valves

Micro Electromagnetic Actuator For Micropump

Design and Fabrication of a Novel MEMS Relay with Low Actuation Voltage.

A Novel Self-Aligned Electrostatic Vertical Actuator Using Plastic Deformation Technology

A Microactuator For Magnetic Field Control Device With Large Shifting Range

Mechanical Model of Low Actuation Voltage RF MEMS Switches

Analyses and Optimization of Electrostatic Film Actuators Considering Electrical Breakdown

Low Voltage, High Speed and Small Area In-Plane MEMS Switch

Electromechanical bistable behavior of a novel dielectric elastomer actuator

Impact of Solid Materials in the Gap Space between Driving Electrodes in a MEMS Tri-Electrode Electrostatic Actuator

Strong Reliable Electrostatic Actuation Based on Self-Clearing Using a Thin Conductive Layer