Abstract:This paper reports a new stick-slip piezoelectric linear actuator with large load density, compact size, and high resolution. It is devised using a dual-arch bridge-type driving mechanism (DBDM) and an integrated elliptical preload mechanism(IEPM). The DBDM can generate a coupling motion on the driving point, which provides clamping and releasing actions during stick-slip motion. Also, the DBDM can magnify the clamping force with large amplification ratios, thus improving driving force and load-carrying capacity. The IEPM uses compact flexure hinges to adjust preload force, reducing structural dimension. Then, theoretical analysis and simulations are conducted, and a prototype is fabricated. A modified driving voltage with smooth turning points is designed to improve motion properties further. Experiments show that load density is 0.037 g/mm $^{\mathbf{3}}$ under the driving voltage of 100 V. The actuator has an overall size of 33.6 mm $\times$ 20 mm $\times$ 8 mm and a displacement resolution of 22 nm. Note to Practitioners —Most research on linear actuators focused on motion displacement improvement, and more research needs to be done on improving load-carrying capacity. Therefore, this paper designs a force amplification linear actuator with a compact structure using the DBDM. In the experimental stage, the sudden change of the driving signal affects the output performance, and a modified sawtooth voltage is used to improve the output speed and load-carrying capacity. The experimental results show that under the modified sawtooth wave voltage, the maximum speed of the slider is 1.4 mm/s, and the speed is increased by 17% compared with the traditional wave. When a 200 g load is applied to the slider, the linear actuator operates at a stable speed of 1.2 $\mu $ m/s, 33% faster than conventional sawtooth waves. As a result, the designed actuator has superior performance at higher loads.

A Novel Low-Voltage Non-Resonant Piezoelectric Linear Actuator Based on Two Alternative Principles

A novel linear piezoelectric actuator with two working principles of standing and traveling wave vibration mode

A Novel U-shaped Stepping Linear Piezoelectric Actuator with Two Driving Feet and Low Motion Coupling: Design, Modeling and Experiments

Design and Experimental Evaluation of a Novel Stepping Linear Piezoelectric Actuator

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

A Novel Inertial Micro-Actuator and Its Application in Positioning Mechanism

A New Piezoelectric Linear Actuator

Development of a Novel Piezoelectric Actuator Based on Stick–Slip Principle by Using Asymmetric Constraint

Design and Experimental Investigation of a Novel Stick-Slip Piezoelectric Actuator Based on V-shaped Driving Mechanism

Developments of a Piezoelectric Actuator with Nano-Positioning Ability Operated in Bending Modes

A Novel Stick-Slip Type Rotary Piezoelectric Actuator

Development of a Linear Piezoelectric Microactuator Inspired by the Hollowing Art

Design and Experiments of a Miniature Piezoelectric Actuator Using a Multilayer PZT Bimorph

A flexure hinged piezoelectric stick–slip actuator with high velocity and linearity for long-stroke nano-positioning

Development of a Novel High Precision Piezoelectric Linear Stepper Actuator

Experiments and Study of a Low-Frequency, High-Speed Bi-Directional Piezoelectric Stick-Slip Actuator

A Long Stroke Linear Stepping Piezoelectric Actuator Using Two Longitudinal-Bending Hybrid Transducers

A New Stick-Slip Piezoelectric Actuator Using Dual-Arch Bridge-Type Compliant Mechanisms

A Novel 2-DOF Piezoelectric Stick-Slip Actuator With Parallel Guiding Decoupling

Design and experimental verification of a bolt-clamped piezoelectric actuator based on clamping and driving mechanism

A Novel Stick–Slip Piezoelectric Actuator Based on a Triangular Compliant Driving Mechanism