Abstract:The precise characterization and measurement of new nanomaterials and nano devices require in situ SEM nanorobotic instrumentation systems, which put forward further technical requirements on nanopositioning techniques of compact structure, cross-scale, nanometer accuracy, high vacuum and non-magnetic environment compatibility, etc. In this work, a novel cross-scale nanopositioning stage was proposed, which combined the advantages of piezoelectric stick-slip positioner and piezoelectric scanner techniques and adopted the idea of macro/micro positioning. A new structure design of a single flexible hinge shared by a small and large PZT was proposed to effectively reduce the size of the positioning stage and achieve millimeter stroke and nanometer motion positioning accuracy. Then, the cross-scale motion generation mechanism of the dual piezoelectric stick-slip drive was studied, the system-level dynamics model of the proposed positioning stages was constructed, and the mechanism design was optimized. Further, a prototype was manufactured and a series of experiments were carried out to test the performance of the stage. The results show that the proposed positioning stage has a maximum motion range of 20 mm and minimum step length of 70 nm under the small piezoceramic ceramic macro-motion stepping mode, and a maximum scanning range of 4.9 μm and motion resolution of 16 nm under the large piezoceramic ceramic micro-motion scanning mode. Moreover, the proposed stage has a compact structure size of 30 × 17 × 8 mm3, with a maximum motion speed of 10 mm/s and maximum load of 2 kg. The experimental results confirm the feasibility of the proposed stage, and nanometer positioning resolution, high accuracy, high speed, and a large travel range were achieved, which demonstrates that the proposed stage has significant performance and potential for many in situ SEM nanorobotic instrument systems.

Simple New Ultrasonic Piezoelectric Actuator for Precision Linear Positioning

A piezodriven three dimensional micropositioning stage for nano-manufacturing

A Novel Inertial Micro-Actuator and Its Application in Positioning Mechanism

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

Development of an Ultrasonic Linear Motor with Ultra-Positioning Capability and Four Driving Feet

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

A Novel Low-Voltage Non-Resonant Piezoelectric Linear Actuator Based on Two Alternative Principles

A piezoelectric inchworm actuator of linear type using symmetrical lever amplification

Piezoelectric Ultrasonic Motor and Fine Positioner with Two Freedoms

A Charge Controller for Synchronous Linear Operation of Multiple Piezoelectric Actuators.

A 2-Dof Piezoelectric Inchworm Actuator for Precise Positioning

A novel XYZ micro/nano positioner with an amplifier based on L-shape levers and half-bridge structure

Redundantly Piezo-Actuated XYθ Z Compliant Mechanism for Nano-Positioning Featuring Simple Kinematics, Bi-Directional Motion and Enlarged Workspace

A Linear Piezoelectric Actuator Based on Working Principle of Three-Petal Mouth of a Rabbit

A novel linear piezoelectric actuator with two working principles of standing and traveling wave vibration mode

Design and Experimental Validation of a Linear Piezoelectric Micromotor for Dual-Slider Positioning

A Three-Dimensional Piezoelectric Nanopositioner Using a Sandwich Transducer

Design and Experiments of a Miniature Piezoelectric Actuator Using a Multilayer PZT Bimorph

A flexure hinged piezoelectric stick–slip actuator with high velocity and linearity for long-stroke nano-positioning

Modeling and Control of a Novel X-Y Parallel Piezoelectric-Actuator Driven Nanopositioner

A Novel Monopolar Cross-Scale Nanopositioning Stage Based on Dual Piezoelectric Stick-Slip Driving Principle