Fixation of dust layer on composite insulator surface and its effect on insulating properties

Xidong Liang,Jing Wang,Yuanji Cai,Yingyan Liu

DOI: https://doi.org/10.3969/j.issn.1003-6520.2013.06.002

2013-01-01

Abstract:Pollution layer on insulator surface may change under surface discharge activities during the long-term running of insulators, which influences the contamination characteristics of the insulators. In order to investigate these influences, on the basis of discharge simulation experiments on insulator surface, we studied the change of the pollution layer on insulator under discharge, and found the fixation phenomenon of the pollution layer. In the experiments, the leakage current was monitored, and the micro-topography of the fixed dust layer was observed by a scanning electron microscope. It was found that the sintering effect on the dust caused by high-temperature arcs was the main reason inducing the fixation. We also studied the influence of the fixed dust layer on the properties of silicone rubber, and measured the hydrophobicity and the flashover voltage of polluted samples before and after discharge treatment. It is concluded that the compact dust layer will decrease the hydrophobicity migration rate, and the discharge fixation reduces the dissolving rate of salt in the pollution layer and consequently increases the flashover voltage of sample.