Roles of Humidity and Temperature Difference in Pollution Layer Wetting of Insulators

戴罕奇,梅红伟,周志成,赵晨龙,王黎明,贾志东

2012-01-01

Abstract:Flashover voltage of contaminated insulators relates to the damp degree of pollution layer on the insulators.Humidity and temperature-difference are two typical factors for dirty layer wetting.We introduced the roles of temperature and humidity in about one-hour short-term wetting of contamination layer.A series of artificial pollution trials,including temperature difference trials and humidity trials,were designed in a temperature and humidity controllable fog chamber.A solid layer method was adopted in the artificial pollution tests,during which ceramic suspension insulators XP-70 were contaminated by brushing specified quantity pollution.Experimental results suggest that when relative humidity(RH) does not reach to 100% and RH as the only factor for wetting,wetting process of dirty layer is very slow and one-hour is not enough to fully damp dirty,thus the NaCl in the contamination cannot be dissolved absolutely and the contribution of NaCl to the conductivity of surface pollution is limited.When the RH reaches to 100% with no temperature difference,contamination can be immediately wetted.Researches also show that temperature difference plays an important role during short-term wetting process.The difference between insulators temperature and the dew point of environment directly affects the strength of leakage current.Temperature difference only in the initial period of wetting plays a dominate role.With the disappearing of temperature difference,humidity becomes the leading factor for dirty damp.The maintenance time of temperature difference playing a leading role in wetting is related to the radiating area and specific heat capacity of the test sample.The smaller the specific is,or the larger the radiating area is,the shorter time the temperature-difference works.