Abstract:Doubly fed induction generators (DFIGs) are negatively affected by the inter-turn short-circuit fault of rotor windings, so for continuous and safe operation of the wind turbine, it is important to examine the DFIGs. For this purpose, a finite element method (FEM) based model has been designed to check the behavior of the generator under normal and inter turn short circuit fault condition in the rotor windings. In this paper, a fieldcircuit coupled model of machine was designed using ANSYS Maxwell 2D. The circuit is modeled by a small elements mesh. Three phase AC current source is provided to the rotor windings and the excitations on rotor winding side are set in the external circuit. The stator and rotor slot number are 72/60 and number of turns per phase for stator and rotor are 228/100. The outer diameter of stator is 520mm and the inner diameter is 350mm. The outer diameter of rotor is 346.6mm and the inner diameter is 110mm. Different rotor inter turn short circuit fault conditions are accomplished by reducing the number of turns in rotor slot. Based on the simulation, it was found that phase difference and positive and negative sequence of current analysis were effective methods to diagnosis the rotor inter turn short circuit fault. During the normal operation, all the three phases are equally distributed and are 120° degrees apart and start to distracted from 120° degree when inter turn short circuit happened. Under normal condition, the negative sequence of current is low. However, as the fault degree enlarges, negative sequence of current becomes larger, thus ratio of negative to positive sequence of current also increases. The simulation results illustrate that the analysis done in this paper is quite appropriate as desired, also proposed technique is advanced in wind turbines.

Rotor Current Dynamics of Doubly Fed Induction Generators During Grid Voltage Dip and Rise

Stator Fault Detection Of Doubly-Fed Induction Generators Using Rotor Instantaneous Power Spectrum

Studies on Electromagnetic Characteristics of DFIG under Short-Circuit Faults of the Grid

Control of Doubly-Fed Induction Generator to Ride-Through Recurring Grid Faults

Doubly Fed Induction Generator Wind Turbine Systems Subject to Recurring Symmetrical Grid Faults

Research on Short-Circuit Current Calculation Method of Doubly-Fed Wind Turbines Considering Rotor Dynamic Process

Improved Vector Control of DFIG Based Wind Turbine During Grid Dips and Swells

Modeling and Analysis of Rotor Current of DFIG with Rotor Chopper Circuit Operative Condition During Three-Phase Symmetric Faults

The Transient Process Analysis of Doubly-Fed Induction Generator During the Voltage Sag

Analysis of the By-Pass Resistance of an Active Crowbar for Doubly-Fed Induction Generator Based Wind Turbines under Grid Faults

Improved Dual-Pi Rotor Current Control Scheme for a Wind-Driven DFIG During Asymmetrical Grid Voltage Dips

Modeling and Control of a Wind-Turbine-driven DFIG Incorporating Core Saturation During Grid Voltage Dips

Transient Behavior Analysis of Low Voltage Ride Through Ability of the DFIG with Different Numbers of Turns in Rotor Windings

A Control Strategy for Doubly-fed Induction Generator Wind Turbines under Asymmetrical Grid Voltage Conditions Caused by Faults

Rotor current transient analysis of DFIG-based wind turbines during symmetrical voltage faults

Dynamic Behavior Of Doubly Fed Induction Generator Wind Turbines Under Three-Phase Voltage Dips

Detection of Rotor Inter-turn Short Circuit Fault in Doubly-fed Induction Generator Using FEM Simulation

Fault Currents of the Doubly Fed Induction Generator with Constant AC Excitation

Transient Analysis of DFIG with a Crowbar Circuit During the Voltage Dip

Dynamic responses of DFIG fault currents under constant AC exitation condition

Analysis of Overspeed Problem of Doubly-Fed Induction Generator under the Power Grid Fault Condition