Abstract:With the prevalence of renewable energy sources such as wind power in the power system, analyzing the fault characteristics of systems composed of DFIGs is becoming increasingly important. Therefore, this article analyzes, at first theoretically, the fault characteristics of a doubly fed induction generator (DFIG) during fault periods. It was found that the fault current of the DFIG exhibited the frequency offset phenomenon, which is affected by the depth of voltage dips and can negatively impact traditional distance protection. Furthermore, a method using a dynamic voltage restorer (DVR) based on superconducting magnetic energy storage (SMES) was adopted to compensate for the fault voltage of DFIG, which can mitigate the voltage dips of the DFIG. This method can not only achieve the fault ride through for DFIG but also significantly improve the frequency offset of the fault current during fault periods. Finally, a model composed of a 2.5 MW DFIG-based wind turbine and a 2.5 MW DVR-based SMES was built using a real-time digital simulator (RTDS) platform, and the simulation results showed that the fault stator voltage of DFIG can be compensated at a rated value of 0.69 kV, and the frequency of fault current can be maintained at 50 Hz These results validate the excellent performance of the method in achieving the fault ride through of DFIG and improving the frequency offset of the fault current by comparing multiple type faults while employing different protection methods.

Doubly Fed Induction Generator Wind Turbine Systems Subject to Recurring Symmetrical Grid Faults

Control of Doubly-Fed Induction Generator to Ride-Through Recurring Grid Faults

Stator Fault Detection Of Doubly-Fed Induction Generators Using Rotor Instantaneous Power Spectrum

Control of DFIG Wind Power System under Unbalanced Grid Voltage

Comparison of control strategies for Doubly fed induction generator under recurring grid faults

Capability of DFIG WTS to ride through recurring asymmetrical grid faults

A Grid Fault Tolerant Doubly Fed Induction Generator Wind Turbine via Series Connected Grid Side Converter

Control Method for Fault Ride-through of DFIG-based Wind Turbines Applied to Weak Grids

A Control Strategy for Doubly-fed Induction Generator Wind Turbines under Asymmetrical Grid Voltage Conditions Caused by Faults

Improved Vector Control of DFIG Based Wind Turbine During Grid Dips and Swells

A Novel Doubly Fed Induction Generator System with Fault Ride Through Capability

Analysis of the By-Pass Resistance of an Active Crowbar for Doubly-Fed Induction Generator Based Wind Turbines under Grid Faults

Torque Oscillation Suppression of DFIG-based Wind Turbines under Unbalanced and Distorted Grid Voltage Conditions

Inductance-Emulating Control for DFIG-Based Wind Turbine to Ride-Through Grid Faults

Several Hot-spot Issues Associated with the Grid-connected Operations of Wind-turbine Driven Doubly Fed Induction Generators

Ride-through and grid support of the DFIG based wind farm during asymmetrical faults

Modeling and Control of a Wind-Turbine-driven DFIG Incorporating Core Saturation During Grid Voltage Dips

Study on Improving Fault Stability of Doubly Fed Induction Wind Turbine by Using Active-Power Transient Frequency Characteristics

The Fault Ride-Through Characteristics of a Double-Fed Induction Generator Using a Dynamic Voltage Restorer with Superconducting Magnetic Energy Storage

Dynamic Behavior Of Doubly Fed Induction Generator Wind Turbines Under Three-Phase Voltage Dips

Double Fed Induction Generator Control for Wind Power Generation