A Grid Fault Tolerant Doubly Fed Induction Generator Wind Turbine via Series Connected Grid Side Converter

Patrick S Flannery,Giri Venkataramanan

DOI: https://doi.org/10.48550/arXiv.2201.08879

2022-01-22

Abstract:With steadily increasing wind turbine penetration, regulatory standards for grid interconnection are evolving to require that wind generation systems ride-through disturbances such as faults and support the grid during such events. Conventional modifications to the doubly fed induction generation (DFIG) architecture for providing ride-through result in limited control of the turbine shaft and grid current during fault events. A DFIG architecture in which the grid side converter is connected in series as opposed to parallel with the grid connection has shown improved low voltage ride through but poor power processing capabilities. In this paper a unified DFIG wind turbine architecture which employs a parallel grid side rectifier and series grid side converter is presented. The combination of these two converters enables unencumbered power processing and improved voltage disturbance ride through. A dynamic model and control structure for this unified architecture is developed. The operation of the system is illustrated using computer simulations.

Systems and Control

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to achieve Low Voltage Ride - Through (LVRT) when the voltage drops suddenly due to grid faults when wind turbines (especially Doubly - Fed Induction Generators, DFIG) are connected to the grid. The traditional DFIG architecture has limitations in dealing with voltage sags, mainly manifested as follows:

1. **Limited control ability**: During fault events, the traditional DFIG architecture has limited control ability over the turbine shaft and grid current, which may lead to equipment damage or system instability.
2. **Insufficient power - handling ability**: When the grid - side converter (GSC) is connected to the grid in series, although the low - voltage ride - through performance can be improved, its power - handling ability is poor.

To overcome these limitations, the paper proposes a new unified DFIG architecture, which combines a Parallel Grid - Side Rectifier (PGSR) and a Series Grid - Side Converter (SGSC), aiming to simultaneously achieve unimpeded power - handling ability and improved voltage - disturbance ride - through performance. Specifically, this new architecture solves the problem in the following ways:

- **Dynamic model and control structure**: The dynamic model and control structure of this unified architecture are developed to ensure the stable operation of the system.
- **Computer simulation verification**: The operational performance of the system is demonstrated through computer simulation, verifying the successful operation of this architecture under the conditions of grid - voltage sags and wind - speed changes.

In conclusion, the main objective of the paper is to improve the stability and reliability of wind - power generation systems under grid - fault conditions by proposing a new DFIG architecture, thereby meeting the strict requirements of grid operators for wind - power generation systems.