Abstract:With the prevalence of renewable energy sources such as wind power in the power system, analyzing the fault characteristics of systems composed of DFIGs is becoming increasingly important. Therefore, this article analyzes, at first theoretically, the fault characteristics of a doubly fed induction generator (DFIG) during fault periods. It was found that the fault current of the DFIG exhibited the frequency offset phenomenon, which is affected by the depth of voltage dips and can negatively impact traditional distance protection. Furthermore, a method using a dynamic voltage restorer (DVR) based on superconducting magnetic energy storage (SMES) was adopted to compensate for the fault voltage of DFIG, which can mitigate the voltage dips of the DFIG. This method can not only achieve the fault ride through for DFIG but also significantly improve the frequency offset of the fault current during fault periods. Finally, a model composed of a 2.5 MW DFIG-based wind turbine and a 2.5 MW DVR-based SMES was built using a real-time digital simulator (RTDS) platform, and the simulation results showed that the fault stator voltage of DFIG can be compensated at a rated value of 0.69 kV, and the frequency of fault current can be maintained at 50 Hz These results validate the excellent performance of the method in achieving the fault ride through of DFIG and improving the frequency offset of the fault current by comparing multiple type faults while employing different protection methods.

Fault Modeling and Characteristic Analysis of Offshore Wind Turbines with Doubly Fed Induction Generator

Modeling and Control of Wind Turbine with Doubly Fed Induction Generator

Phase–amplitude Model for Doubly Fed Induction Generators

Model parameter identification of DFIG based on short circuit current

Control of Doubly-Fed Induction Generator to Ride-Through Recurring Grid Faults

Capability of DFIG WTS to ride through recurring asymmetrical grid faults

Modeling and Analysis of Rotor Current of DFIG with Rotor Chopper Circuit Operative Condition During Three-Phase Symmetric Faults

Doubly Fed Induction Generator Wind Turbine Systems Subject to Recurring Symmetrical Grid Faults

Research on Asymmetry Fault Characteristics of Doubly Fed Induction Generator Wind Turbine

Modeling and Control of a Wind-Turbine-driven DFIG Incorporating Core Saturation During Grid Voltage Dips

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

A Novel Doubly Fed Induction Generator System with Fault Ride Through Capability

Research on fault characteristics and relay protection strategy of doubly fed induction generator wind turbine

A Control Strategy for Doubly-fed Induction Generator Wind Turbines under Asymmetrical Grid Voltage Conditions Caused by Faults

A Modeling Method for the Control Circuit of a Double-Fed Induction Generator in a Wind Power System Based on Multimodel Fusion

Model of Stator Inter-Turn Short Circuit Fault in Doubly-Fed Induction Generators for Wind Turbine

Wind Turbine Model and Initialization Analysis with High Penetration of Grid-connected Wind Farms of DFIG Type

Transient Characteristic Modeling of DFIG Considering Control Loop under Grid Voltage Fault

Modeling Principle and Parameter Identification of Double Fed Wind Turbine for Electromechanical Transient Simulation of Power System

A Grid Fault Tolerant Doubly Fed Induction Generator Wind Turbine via Series Connected Grid Side Converter

The Fault Ride-Through Characteristics of a Double-Fed Induction Generator Using a Dynamic Voltage Restorer with Superconducting Magnetic Energy Storage