Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Rotor current transient analysis of DFIG-based wind turbines during symmetrical voltage faults

Stator Fault Detection Of Doubly-Fed Induction Generators Using Rotor Instantaneous Power Spectrum

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Modeling and Analysis of Rotor Current of DFIG with Rotor Chopper Circuit Operative Condition During Three-Phase Symmetric Faults

Studies on Electromagnetic Characteristics of DFIG under Short-Circuit Faults of the Grid

Rotor Current Dynamics of Doubly Fed Induction Generators During Grid Voltage Dip and Rise

Transient Characteristic Modeling of DFIG Considering Control Loop under Grid Voltage Fault

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Simulation Using Matlab/Simulink On Rotor Winding Inter-Turn Short Circuit Fault In Dfig

Experimental Research and Analysis on Rotor Winding Inter-Turn Short Circuit Fault in DFIG

Improved Vector Control of DFIG Based Wind Turbine During Grid Dips and Swells

Transient Behavior Analysis of Low Voltage Ride Through Ability of the DFIG with Different Numbers of Turns in Rotor Windings

Dynamic responses of DFIG fault currents under constant AC exitation condition

Transient Simulation Analysis of Doubly-fed Wind Power Generation System

Fault Detection and Fault Severity Calculation for Rotor Windings Based on Spectral, Wavelet and Ratio Computation Analyses of Rotor Current Signals for a Doubly Fed Induction Generator in Wind Turbines

Research on Short-Circuit Current Calculation Method of Doubly-Fed Wind Turbines Considering Rotor Dynamic Process

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

The Transient Process Analysis of Doubly-Fed Induction Generator During the Voltage Sag

Transient Analysis of DFIG with a Crowbar Circuit During the Voltage Dip

Improved Dual-Pi Rotor Current Control Scheme for a Wind-Driven DFIG During Asymmetrical Grid Voltage Dips

Capability of DFIG WTS to ride through recurring asymmetrical grid faults