Abstract:High-energy irradiation significantly increases the optical losses and noise coefficients of laser materials, leading to a substantial decrease in the slope efficiency or gain performance of laser output. To address this issue, we propose a strategy to enhance the radiation resistance of glasses/fibers by introducing phase interfaces. Based on the sol–gel method, through phase-separation techniques and high-temperature annealing treatments, silica-rich and phosphorus-rich phases were formed in erbium-ytterbium co-doped high-phosphorus silica glass, and nanoscale phase interfaces with specific densities, stability levels, and homogeneous distributions of doped elements were constructed between the phases. Using high-resolution transmission electron microscopy, nuclear magnetic resonance, and spectroscopic analyses, we tracked the evolution of the internal microstructure of the glasses at the atomic level. The findings confirmed that annealing effectively controlled the density of the phase interfaces formed. Under 1 kGy X-ray irradiation, glasses with effective phase interfaces exhibited significant reduction in radiation-induced attenuation (RIA) and improvement in photoluminescence intensity compared to pristine glasses. This indicated that effective phase interfaces could act as complex centers for irradiation-induced point defects, absorbing radiant energy and trapping these defects, thus mitigating high-energy radiation-induced damages. Furthermore, online irradiation tests on the Er 3+ /Yb 3+ co-doped silica fibers supported this result. Compared to pristine fiber, fibers annealed for 3 h and annealed for 20 h with different phase interfacial densities showed 45% and 73% lower RIA at 1080 nm, respectively.

Active Radiation Hardening Technology for Fiber-Optic Source

Homemade radiation-resistant Er/Yb co-doped silica fiber for space applications in low and high-dose radiation environments

Influence of Pre-Radiation and Photo-Bleaching on the Yb-Doped Fiber Laser Radiated with Gamma-ray

Gamma Radiation Induced Darkening Effect on Ytterbium Doped Fiber Oscillators

Angular Random Walk Improvement of a Fiber-Optic Gyroscope Using an Active Fiber Ring Resonator

Radiation Effects on Ytterbium- and Ytterbium/Erbium-Doped Double-Clad Optical Fibers

Comparative Investigation of Gamma Radiation Effects on Long Period Gratings and Optical Power in Different Optical Fibers

Ionizing Radiation Effect upon Er/Yb Co-Doped Fibre Made by In-Situ Nano Solution Doping

Gamma Radiation-Induced Effects over an Optical Fiber Laser: Towards New Sensing Applications

Radiation Damage Mechanisms and Research Status of Radiation-Resistant Optical Fibers: A Review

Enhanced radiation resistance of Er3+/Yb3+ co-doped high-phosphorus silica glasses and fibers via phase-interface engineering

Measurement of radiation induced attenuation in irradiated active fibers using optical frequency domain reflectometry

Overview of radiation hardening techniques for IC design

Reducing Radiation Effects on Fiber Optic Quench Detection Sensors with Optical Annealing

532 nm pump induced photo-darkening inhibition and photo-bleaching in high power Yb-doped fiber amplifiers

Experimental study on activating bismuth active centers in bismuth/erbium co-doped optical fiber by ionizing radiations

Impact of gamma-ray radiation-induced photodarkening on mode instability degradation of an ytterbium-doped fiber amplifier

Experimental investigation of radiation effect on erbium-ytterbium co-doped fiber amplifier for space optical communication in low-dose radiation environment.

Radiation tolerant frequency comb fiber laser for space applications

Radiation Monitoring with Radiosensitive Pure-Silica Core Ultra-Low Loss Optical Fiber

Influence of spin–orbit coupling on the gamma-ray induced attenuation in high-OH silica fibers