Abstract:High-energy irradiation significantly increases the optical losses and noise coefficients of laser materials, leading to a substantial decrease in the slope efficiency or gain performance of laser output. To address this issue, we propose a strategy to enhance the radiation resistance of glasses/fibers by introducing phase interfaces. Based on the sol–gel method, through phase-separation techniques and high-temperature annealing treatments, silica-rich and phosphorus-rich phases were formed in erbium-ytterbium co-doped high-phosphorus silica glass, and nanoscale phase interfaces with specific densities, stability levels, and homogeneous distributions of doped elements were constructed between the phases. Using high-resolution transmission electron microscopy, nuclear magnetic resonance, and spectroscopic analyses, we tracked the evolution of the internal microstructure of the glasses at the atomic level. The findings confirmed that annealing effectively controlled the density of the phase interfaces formed. Under 1 kGy X-ray irradiation, glasses with effective phase interfaces exhibited significant reduction in radiation-induced attenuation (RIA) and improvement in photoluminescence intensity compared to pristine glasses. This indicated that effective phase interfaces could act as complex centers for irradiation-induced point defects, absorbing radiant energy and trapping these defects, thus mitigating high-energy radiation-induced damages. Furthermore, online irradiation tests on the Er 3+ /Yb 3+ co-doped silica fibers supported this result. Compared to pristine fiber, fibers annealed for 3 h and annealed for 20 h with different phase interfacial densities showed 45% and 73% lower RIA at 1080 nm, respectively.

Radiation tolerant frequency comb fiber laser for space applications

Homemade radiation-resistant Er/Yb co-doped silica fiber for space applications in low and high-dose radiation environments

Radiation Effects on Ytterbium- and Ytterbium/Erbium-Doped Double-Clad Optical Fibers

Space radiation effect on the characters of fiber amplifiers for space optical communication

Radiation-resistant cerium co-doped erbium-doped fibers for C- and L-band amplifiers in a high-dose gamma-radiation environment

Experimental investigation of radiation effect on erbium-ytterbium co-doped fiber amplifier for space optical communication in low-dose radiation environment.

Gamma Radiation-Induced Effects over an Optical Fiber Laser: Towards New Sensing Applications

Experimental Investigation Of Gamma-Ray Irradiation Effect On Tm-Doped Fibers

Radiation-hardened optical amplifier based on multicore fiber for telecommunication satellites

Simulation Approach for the Design of Radiation-Hardened Erbium Doped Fiber Amplifiers

Influence of Pre-Radiation and Photo-Bleaching on the Yb-Doped Fiber Laser Radiated with Gamma-ray

Design Optimization of Yb-doped Fiber Lasers for Operation in Radiation Environments

Space Radiation Effect on Edfa for Inter-Satellite Optical Communication

Enhanced Radiation Hardness of InAs/GaAs Quantum Dot Lasers for Space Communication

Narrow-linewidth external cavity semiconductor laser based on permanent index modulated grating optical feedback for radiation resistance

Radiation hardness of open Fabry-Perot microcavities

Temperature Influence on the Radiation Responses of Erbium‐Doped Fiber Amplifiers

Enhanced radiation resistance of Er3+/Yb3+ co-doped high-phosphorus silica glasses and fibers via phase-interface engineering

Analysis of the space radiation effect on EDFA for inter-satellite optical communication

High Water-Resistant and Thermal Stable Fluoride Fibers for Mid-Infrared Laser

Comparative Investigation of Gamma Radiation Effects on Long Period Gratings and Optical Power in Different Optical Fibers