Abstract:High-energy irradiation significantly increases the optical losses and noise coefficients of laser materials, leading to a substantial decrease in the slope efficiency or gain performance of laser output. To address this issue, we propose a strategy to enhance the radiation resistance of glasses/fibers by introducing phase interfaces. Based on the sol–gel method, through phase-separation techniques and high-temperature annealing treatments, silica-rich and phosphorus-rich phases were formed in erbium-ytterbium co-doped high-phosphorus silica glass, and nanoscale phase interfaces with specific densities, stability levels, and homogeneous distributions of doped elements were constructed between the phases. Using high-resolution transmission electron microscopy, nuclear magnetic resonance, and spectroscopic analyses, we tracked the evolution of the internal microstructure of the glasses at the atomic level. The findings confirmed that annealing effectively controlled the density of the phase interfaces formed. Under 1 kGy X-ray irradiation, glasses with effective phase interfaces exhibited significant reduction in radiation-induced attenuation (RIA) and improvement in photoluminescence intensity compared to pristine glasses. This indicated that effective phase interfaces could act as complex centers for irradiation-induced point defects, absorbing radiant energy and trapping these defects, thus mitigating high-energy radiation-induced damages. Furthermore, online irradiation tests on the Er 3+ /Yb 3+ co-doped silica fibers supported this result. Compared to pristine fiber, fibers annealed for 3 h and annealed for 20 h with different phase interfacial densities showed 45% and 73% lower RIA at 1080 nm, respectively.

Homemade radiation-resistant Er/Yb co-doped silica fiber for space applications in low and high-dose radiation environments

Radiation Effects on Ytterbium- and Ytterbium/Erbium-Doped Double-Clad Optical Fibers

Radiation-resistant cerium co-doped erbium-doped fibers for C- and L-band amplifiers in a high-dose gamma-radiation environment

Experimental investigation of radiation effect on erbium-ytterbium co-doped fiber amplifier for space optical communication in low-dose radiation environment.

Space radiation effect on the characters of fiber amplifiers for space optical communication

Ionizing Radiation Effect upon Er/Yb Co-Doped Fibre Made by In-Situ Nano Solution Doping

Enhanced radiation resistance of Er3+/Yb3+ co-doped high-phosphorus silica glasses and fibers via phase-interface engineering

Radiation tolerant frequency comb fiber laser for space applications

Space Radiation Effect on Edfa for Inter-Satellite Optical Communication

Influence of Pre-Radiation and Photo-Bleaching on the Yb-Doped Fiber Laser Radiated with Gamma-ray

Simulation Approach for the Design of Radiation-Hardened Erbium Doped Fiber Amplifiers

Investigation of the Irradiation Effect on Erbium-Doped Fiber Amplifiers Composed by Different Density Erbium-Doped Fibers

Experimental Investigation Of Gamma-Ray Irradiation Effect On Tm-Doped Fibers

Erbium-doped nanoparticles in silica-based optical fibres

Preparation of Er:YAG Crystal-Derived All-Glass Silica Fibers For a 1550-nm Single-Frequency Laser

Comparative study of γ-radiation resistance between Yb/Ce/F and Yb/P doped aluminosilicate fibers

Radiation Effect on EDFA for Inter-Satellite Optical Communication on Low Dose Orbits

Temperature Influence on the Radiation Responses of Erbium‐Doped Fiber Amplifiers

LD End-Pumped Er,Pr:GYSGG Single Crystal Fiber Laser As a Potential Mid-Infrared Seed Source Applied in Radiation Environment

Highly efficient Er/Yb-codoped fiber amplifier with an Yb-band fiber Bragg grating.

High Water-Resistant and Thermal Stable Fluoride Fibers for Mid-Infrared Laser