Abstract:High-energy irradiation significantly increases the optical losses and noise coefficients of laser materials, leading to a substantial decrease in the slope efficiency or gain performance of laser output. To address this issue, we propose a strategy to enhance the radiation resistance of glasses/fibers by introducing phase interfaces. Based on the sol–gel method, through phase-separation techniques and high-temperature annealing treatments, silica-rich and phosphorus-rich phases were formed in erbium-ytterbium co-doped high-phosphorus silica glass, and nanoscale phase interfaces with specific densities, stability levels, and homogeneous distributions of doped elements were constructed between the phases. Using high-resolution transmission electron microscopy, nuclear magnetic resonance, and spectroscopic analyses, we tracked the evolution of the internal microstructure of the glasses at the atomic level. The findings confirmed that annealing effectively controlled the density of the phase interfaces formed. Under 1 kGy X-ray irradiation, glasses with effective phase interfaces exhibited significant reduction in radiation-induced attenuation (RIA) and improvement in photoluminescence intensity compared to pristine glasses. This indicated that effective phase interfaces could act as complex centers for irradiation-induced point defects, absorbing radiant energy and trapping these defects, thus mitigating high-energy radiation-induced damages. Furthermore, online irradiation tests on the Er 3+ /Yb 3+ co-doped silica fibers supported this result. Compared to pristine fiber, fibers annealed for 3 h and annealed for 20 h with different phase interfacial densities showed 45% and 73% lower RIA at 1080 nm, respectively.

Radiation-resistant cerium co-doped erbium-doped fibers for C- and L-band amplifiers in a high-dose gamma-radiation environment

Homemade radiation-resistant Er/Yb co-doped silica fiber for space applications in low and high-dose radiation environments

Experimental Realization of A Pbse Quantum Dot Doped Fiber Amplifier with Ultra-Bandwidth Characteristic

PbSe Quantum-Dot-doped Broadband Fiber Amplifier Based on Sodium-Aluminum-borosilicate-silicate Glass

Temperature Influence on the Radiation Responses of Erbium‐Doped Fiber Amplifiers

Experimental investigation of radiation effect on erbium-ytterbium co-doped fiber amplifier for space optical communication in low-dose radiation environment.

Comparative study of γ-radiation resistance between Yb/Ce/F and Yb/P doped aluminosilicate fibers

Gamma Radiation-Induced Effects over an Optical Fiber Laser: Towards New Sensing Applications

High-efficiency cladding-pumped Er/Yb co-doped alumino-phosphosilicate fiber for an extended L-band amplification

Radiation tolerant frequency comb fiber laser for space applications

Modeling and Experiments of the Gain and Noise Figure for an Irradiated Erbium-Ytterbium Co-Doped Fiber Amplifier

Ionizing Radiation Effect upon Er/Yb Co-Doped Fibre Made by In-Situ Nano Solution Doping

An Erbium-Doped Fiber Amplifier With Tunable Gain-Clamping in the Extended L-Band

Self-Adaptive High Anti-Radiation EDFA for Space Optical Communication Systems

A 23-dB bismuth-doped optical fiber amplifier for a 1700-nm band

Improving extended L-band fiber amplifiers using Er 3+ : Y 3+ co-doped silicate with optimized alumino-phospho-silicate glass matrix

Radiation Effects on Ytterbium- and Ytterbium/Erbium-Doped Double-Clad Optical Fibers

Enhanced radiation resistance of Er3+/Yb3+ co-doped high-phosphorus silica glasses and fibers via phase-interface engineering

Broadband near-infrared emission property in Er3+/Ce3+ co-doped silica-germanate glass for fiber amplifier

Experimental study of two-stage erbium doped fiber amplifiers pumped by 980 nm and 1480nm LD

Radiation hardness of Ce3+-doped heavy germanate glasses