Abstract:We report the high peak power picosecond hybrid fiber and solid-state laser amplifier system. The passively mode-locked solid-state seed source produced an average power of 1.8 W with pulse width of 14 ps and repetition rate of 86 MHz. It was directly coupled into the first Yb-doped polarized photonic crystal fiber amplifier stage. To avoid the nonlinear effects in fiber, the output power from the first stage was merely amplified to 24 W with the narrow spectra broadening of 0.21 nm. For the improvement of the peak power, the dual-end pumped composite Nd:YVO4 amplifier system has been chosen at the second stage. To reduce the serious thermal effect, the thermally bonded composite YVO4 – Nd:YVO4 – YVO4 rod crystal was used as the gain medium. The 53 W TEM00 mode with the peak power of 40 kW, beam quality of M2 < 1.15, corresponding to the optical-optical efficiency of 42.4% was obtained at the hybrid amplifier laser system. The system allows using a low power seed source and demonstrates an increase in the peak power beyond a fiber master oscillator power amplifier's (MOPA's) limit.

All-fiber Eye-Safe Pulsed Laser with Er-Yb Co-doped Multi-Stage Amplifier

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Eye-safe fiber laser for long-range 3D imaging applications

Pulse shaping, high average power narrow linewidth Er, Yb co-doped fiber amplifier

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

End-Pumped 300 W Continuous-Wave Ytterbium-Doped All-Fiber Laser With Master Oscillator Multi-Stage Power Amplifiers Configuration

All-Fiber Millijoule Energy and Nanoseconds Pulse Operation of A High Beam Quality Multi-Stage Pulse-Pumped Yb-Doped Amplifier Cascade

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

175-W Continuous-Wave Master Oscillator Power Amplifier Structure Ytterbium-Doped All-Fiber Laser

Development of 10kW Peak-Power Pulsed Single-Mode Fiber Laser

All-fiber single frequency pulsed amplifier with 412 W peak power output operating at 1030 nm

Gain Switched All-fiberized Pulse Yb Fiber Laser

High Peak Power Picosecond Hybrid Fiber and Solid-State Amplifier System

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Single Mode Mopa Structured All-Fiber Yb Pulse Fiber Amplifier at Low Repetition

219.6 W large-mode-area Er:Yb codoped fiber amplifier operating at 1600 nm pumped by 1018 nm fiber lasers

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

A 12 Mj 11 Ns Spectrally Narrow Fiber Amplifier with A Pulsed Pump

414.9 W In-Band Pumped Er/Yb Co-Doped Fiber Amplifier Seeded by a Random Fiber Laser.