Abstract:High-power Er and Er/Yb co-doped fiber laser systems, operating at 1550 nm are attractive for many practical applications. At present, the most efforts of the laser developers are focused on the production of such lasers either with ultrashort (fs) or ns pulse duration. For the ns operation, master oscillator power amplifier (MOPA) design is commonly used, where the master oscillator is semiconductor DFB or DBR laser. It allows on the fly electronically configurable design of the laser, with adjustable repetition rate and pulse duration. Such concept cannot be applied if μs pulse-width is required, especially at low repetition rate due to several reasons, where the main are: pulse steepening during the amplification, and significand amplified spontaneous emission (ASE) growth. Pulsed pumping, is a common solution to avoid ASE at low repetition rate for the ns or fs laser sources. However, for the μs laser it does not solve the problem of pulse steepening, which decreases the pulse duration from μs range to almost ns, and, due to specific Er-Yb band configuration, at reasonable pump level the inversion population increases slowly, reaching the maximum nearly 150 - 300 μs after the pump starts. It makes impossible to create homogeneous rectangular-shape μs pulses. In our work, all these features were analyzed by performing numerical simulation, based on the model described in [1].

Development of 10kW Peak-Power Pulsed Single-Mode Fiber Laser

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Direct Generation of 148 nm and 44.6 fs Pulses in an Erbium-Doped Fiber Laser

High Energy (100 Mj) and High Peak Power (8 MW) Nanosecond Pulses Delivered by Fiber Lasers and Self-Focusing Analysis Based on a Novel Mode Decomposition Method

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

PCF Based High Power Narrow Line Width Pulsed Fiber Laser

108 fs high-power mode locked double-clad ytterbium-doped fiber laser using FePS3 saturable absorber

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

High-energy Femetosecond Er3+-doped Fiber Laser

High Energy and High Power Single Frequency 1572 nm Laser With an All-Fiber MOPA

μS Pulsed, Low Repetition Rate, 30 W Fiber Laser at 1550 nm

Femtosecond Yb-doped Tapered Fiber Pulse Amplifiers with Peak Power of over Hundred Megawatts

All-fiber Eye-Safe Pulsed Laser with Er-Yb Co-doped Multi-Stage Amplifier

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

Acousto-Optic Q-Switched Pulse Fiber Laser with the Peak Power of 9kW

High-energy 100-ns single-frequency all-fiber laser at 1064 nm

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

A 102 W High-Power Linearly-Polarized All-Fiber Single-Frequency Laser at 1560 Nm