Abstract:Effective online monitoring of the spatial distribution of high-energy radiation is of significant importance in various fields such as medical imaging, high-energy physics, and homeland security. However, achieving radiation detectors with both high sensitivity and minimal disturbance is an enormous challenge. The present study introduces a solution to this bottleneck issue through the development of a full-inorganic scintillating fiber, successfully demonstrating its application in constructing a radiation monitoring device. The scintillating fiber, activated with Ce3+ and fabricated using the melt-in-tube approach, is lightweight with a density of 2.5 g cm-3 and exhibits efficient scintillating emission with a light yield of 4000 photons MeV-1. These characteristics enable the achievement of radiation detection with high sensitivity while keeping disturbance to the incident radiation beam at a minimum. Furthermore, 2D and 3D radiation beam monitors are constructed based on these scintillating fibers, facilitating spatial radiation monitoring. The findings demonstrate that full-inorganic scintillating fibers and devices offer a synergistic combination of high sensitivity and negligible disturbances. This progress not only introduces a novel full-inorganic fiber for radiation detection but also suggests promising applications in various nuclear fields where 3D radiation beam tracking is essential. Scintillating fibers are employed to online monitoring for the spatial distribution of high-energy radiation. The fabrication of full-inorganic scintillating fibers using the melt-in-tube strategy offers significant advantages, including high sensitivity and minimal disturbance to the incident radiation. The application of these scintillating fibers in the construction of 2D and 3D radiation monitors enables precise tracking of spatial radiation beam distribution. image

Radiation Monitoring with Radiosensitive Pure-Silica Core Ultra-Low Loss Optical Fiber

Monitoring of Ultra-High Dose Rate Pulsed X-ray Facilities with Radioluminescent Nitrogen-Doped Optical Fiber

Full‐Inorganic Micro‐Fiber Probe for Real‐Time Radiation Monitoring

Development of an Anthracene-Coated SMF-MMF-SMF Sensor for Low-Dose UV Radiation Detection and Dosimetry

Radiation Distribution Sensor with Optical Fibers for High Radiation Fields

Regeneration of Phosphosilicate Optical Fiber Dosimeters operating in the Visible Domain

Potential of Germano-phosphosilicate Single Mode Optical Fibers for Dosimetry

Recent Advances in Optical Fiber Enabled Radiation Sensors

Photobleaching Effect on the Sensitivity Calibration at 638 nm of a Phosphorus-Doped Single-Mode Optical Fiber Dosimeter

Temperature Effect on the Radioluminescence of Differently Doped Silica-Based Optical Fibers

Comparative Investigation of Gamma Radiation Effects on Long Period Gratings and Optical Power in Different Optical Fibers

Miniaturized fiber dosimeter of medical radiations on a narrow optical fiber

Optical spectra in pure-silica-core single mode optical fibers after high-fluence reactor irradiation

Development of local-power-free, remote α-particle detection using optical fibers

Numerical Analysis of Radiation Effects on Fiber Optic Sensors

Dual-core Ce:YAG-derived Silicate Scintillation Fiber for Real-time X-ray Detection

A Scintillating Fiber Dosimeter for Radiology and Brachytherapy with photodiode readout

Reducing Radiation Effects on Fiber Optic Quench Detection Sensors with Optical Annealing

Characterization of Yb-doped silica optical fiber as real-time dosimeter

Simulation-assisted Methodology for the Design of Fiber-based Dosimeters for a Variety of Radiation Environments

Online Radiation Beam Tracking by Using Full‐Inorganic Scintillating Fibers