Abstract:Background Optically stimulated luminescent dosimeters (OSLDs) can be bleached and reused, but questions remain about the effects of repeated bleaching and fractionation schedules on OSLD performance. Purpose The aim of this study was to investigate how light sources with different wavelengths and different fractionation schemes affect the performance of reused OSLDs. Methods OSLDs (N = 240) were irradiated on a cobalt‐60 beam in different step sizes until they reached an accumulated dose of 50 Gy. Between irradiations they were bleached using light sources of different wavelengths: the Imaging and Radiation Oncology Core (IROC) bleaching system (our control); monochromatic red, green, yellow, and blue lights; and a polychromatic white light. Sensitivity and linearity‐based correction factors were determined as a function of dose step‐size. The rate of signal removal from different light sources was characterized by sampling these OSLDs at various time points during their bleaching process. Relative doses were calculated according to the American Association of Physicists in Medicine Task Group‐191. Signal repopulation was investigated by irradiating OSLDs (N = 300) to various delivered doses of 2, 10, 20, 30, 40, and 50 Gy in a single fraction, bleached with one of the colors, and read over time. Fractionation effects were evaluated by irradiating OSLDs up to 30 Gy in different size steps. After reading, the OSLDs were bleached following IROC protocol. OSLDs (N = 40) received irradiations in 5, 10, 15, 30 Gy fractions until they had an accumulated dose of 30 Gy; The sensitivity response of these OSLDs was compared with reference OSLDs that had no accumulated dose. Results Light sources with polychromatic spectrums (IROC and white) bleached OSLDs faster than did sources with monochromatic spectra. Polychromatic light sources (white light and IROC system) provided the greatest dose stability for OSLDs that had larger amounts of accumulated dose. Signal repopulation was related to the choice of bleaching light source, timing of bleaching, and amount of accumulated dose. Changes to relative dosimetry were more pronounced in OSLDs that received larger fractions. At 5‐Gy fractions and above, all OSLDs had heightened sensitivity, with OSLDs exposed to 30‐Gy fractions being 6.4% more sensitive than reference dosimeters. Conclusions The choice of bleaching light plays a role in how fast an OSLD is bleached and how much accumulated dose an OSLD can be exposed to while maintaining stable signal sensitivity. We have expanded upon investigations into signal repopulation to show that bleaching light plays a role in the migration of deep traps to dosimetric traps after bleaching. Our research concludes that the bleaching light source and fractionation need to be considered when reusing OSLD.

Photobleaching Effect on the Sensitivity Calibration at 638 nm of a Phosphorus-Doped Single-Mode Optical Fiber Dosimeter

Regeneration of Phosphosilicate Optical Fiber Dosimeters operating in the Visible Domain

Potential of Germano-phosphosilicate Single Mode Optical Fibers for Dosimetry

Simulation-assisted Methodology for the Design of Fiber-based Dosimeters for a Variety of Radiation Environments

A Scintillating Fiber Dosimeter for Radiology and Brachytherapy with photodiode readout

Radiation Monitoring with Radiosensitive Pure-Silica Core Ultra-Low Loss Optical Fiber

Temperature Effect on the Radioluminescence of Differently Doped Silica-Based Optical Fibers

Design and commissioning of a Silicon Photomultiplier-based dosimeter for Low Dose Rate (LDR) oncological brachytherapy

Characterization of Yb-doped silica optical fiber as real-time dosimeter

Monitoring of Ultra-High Dose Rate Pulsed X-ray Facilities with Radioluminescent Nitrogen-Doped Optical Fiber

Laser-induced Damage in a Silicon-Based Photodiode by MHz Picosecond Laser

Performance evaluation of an inorganic optical fibre dosimeter for use in external beam radiotherapy with pulsed beams

Influence of Pre-Radiation and Photo-Bleaching on the Yb-Doped Fiber Laser Radiated with Gamma-ray

Miniaturized fiber dosimeter of medical radiations on a narrow optical fiber

Biocompatibility and radiosensitivity of a fiber optical-based dosimeter: biological applications

Comparative Investigation of Gamma Radiation Effects on Long Period Gratings and Optical Power in Different Optical Fibers

Characterisation of a Silicon Photomultiplier Based Oncological Brachytherapy Fibre Dosimeter

Effect of irradiation on temperature performance of dispersion-compensation no-core cascade optical-fiber sensor coated with polydimethylsiloxane film

Combined Radiation and Temperature Effects on Brillouin-Based Optical Fiber Sensors

Chromatic bleaching and fractionation effects on optically stimulated luminescent dosimeter reuse

Effect of Photons and Electrons on the Over-Response of Optical Fiber X-ray Sensors