Abstract:Cutter runout is a common and inevitable phenomenon impacting the geometry accuracy in the milling process. However, most of the works on tool path planning neglect the cutter runout effect. In this paper, a new approach is presented to integrate the cutter runout effect into envelope surface modeling and tool path optimization for five-axis flank milling with a conical cutter. Based on the geometry model of cutter runout which consists of cutter axis and cutter tilt, an analytic expression of cutter edge combined with four runout parameters is derived. Then the envelope surface formed by each cutter edge is constructed using the envelope theory of sphere congruence. Due to the cutter runout effect, the envelope surfaces formed by the cutter edges are different from each other, and the valid envelope surface is the combination of these envelope surfaces which contribute to the final machined surface. To measure the machining errors, the geometry deviations between the valid envelope surface and the design surface are calculated with the distance function. On the basis of the differential property of the distance function, tool path optimization considering cutter runout is modeled as a mixed-integer linear programming (MILP) problem, which can be solved by the branch-and-bound method. Finally, numerical examples are given to confirm the validity and efficiency of the proposed approach. The results show that the geometry errors induced by runout can be reduced significantly using the proposed method.

Envelope surface formed by cutting edge under runout error in five-axis flank milling

Envelope Surface Modeling and Tool Path Optimization for Five-Axis Flank Milling Considering Cutter Runout

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

Influence of Tool Rotation Errors on Flank Machined Surface

Surface Contour Error Model of Five-Axis Machining Considering Multifactor Coupling Effects

Elliptical Model for Surface Topography Prediction in Five-Axis Flank Milling

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

Effect of Tool Rotation Erroron the Topography of Flank Machined Surface

A Cutting Force Model Based on Compensated Chip Thickness in Five-Axis Flank Milling

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Dimensional surface error prediction model in five-axis flank milling for thin-walled parts

An accurate surface error optimization for five-axis machining of freeform surfaces

Five-axis flank milling error model of a face gear considering the tool tip dynamics

Roughness control method for five-axis flank milling based on the analysis of surface topography

Surface form error prediction in five-axis flank milling of thin-walled parts

3D Surface Topography Prediction in the Five-Axis Milling of Plexiglas and Metal Using Cutters with Non-Uniform Helix and Pitch Angles Combining Runout

Analysis of End Milling Surface Error Considering Tool Compliance

Model for Surface Topography Prediction in Cylinder Turning

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Prediction of Cutting Forces in Flank Milling of Parts with Non-Developable Ruled Surfaces

Machining Deformation Prediction of Thin-Walled Workpieces in Five-Axis Flank Milling